【摘要】：車載式局部放電超高頻檢測裝置能夠?qū)Τㄩ_式變電站內所有高壓設備進行局部放電監測與定位,及時排除故障,維持電網安全穩定運行。針對超高頻局部放電檢測定位準確度低的難點,提出了復小波變換濾波降噪結合高階累積量的敞開式變電站局部放電超高頻信號定位算法,在保留信號的幅值和相位特征下最大程度去除噪聲干擾,基于仿真分析了結合高階累積量計算了局部放電信號的時延,結果表明該方法有效提高了時延的計算準確度及定位準確性。現場應用表明該方法能有效計算超高頻信號的時延,對局部放電位置實現空間定位,具有較強的可靠性與實用性。
[Abstract]:The vehicle-borne partial discharge ultra-high frequency (UHF) detection device can monitor and locate all the high voltage equipments in the open substation, remove the faults in time, and maintain the safe and stable operation of the power network. Aiming at the difficulty of low localization accuracy in UHF PD detection, a novel UHF location algorithm based on complex wavelet transform filter combined with high order cumulants is proposed. With the amplitude and phase characteristics of the reserved signal, the noise interference is removed to the maximum extent. Based on the simulation analysis, the delay of partial discharge signal is calculated by combining the high-order cumulant. The results show that this method can effectively improve the accuracy of time delay calculation and location. The field application shows that this method can effectively calculate the time delay of UHF signal and realize the spatial location of partial discharge. It has strong reliability and practicability.
【作者單位】： 廣東電網公司電力科學研究院;武漢銳特星科技有限公司;
【分類號】：U463.6;TM76

【參考文獻】

相關期刊論文 前5條

1 許中榮;唐炬;張曉星;孫才新;;應用復小波變換對電力變壓器局部放電超高頻信號去噪研究[J];電力自動化設備;2008年01期

2 侯慧娟;盛戈v，

本文編號：2197176