本文選題：燒結煙氣 + 余熱回收��； 參考：《工程熱物理學報》2014年12期

【摘要】：針對鋼鐵工業中的大量燒結煙氣余熱,提出一種基于熱電發電技術的顯熱回收方案,建立了相應的計算模型,得到了煙氣、冷卻水、熱電單元端點溫度沿流動方向的分布特征,分析了煙氣溫度、煙氣換熱系數、冷卻水換熱系數對最優熱電單元長度的影響,并分析了熱電單元橫截面積對電流和電壓的影響。結果表明,對于350℃的燒結煙氣,每平方米換熱面積可以產生約1.47 kW電能,熱效率約為4.5%,設備成本的回收周期在4年左右。
[Abstract]:A sensible heat recovery scheme based on thermoelectric power generation technology is proposed for the waste heat of sintering flue gas in iron and steel industry. The corresponding calculation model is established, and the distribution characteristics of flue gas, cooling water and terminal temperature of thermoelectric unit along the flow direction are obtained. The influence of flue gas temperature, flue gas heat transfer coefficient and cooling water heat transfer coefficient on the optimal length of thermoelectric unit is analyzed. The influence of cross-sectional area of thermoelectric unit on current and voltage is also analyzed. The results show that for the sintered flue gas at 350 鈩，

本文編號：2118005