本文選題：DALI調光 + LED驅動器　； 參考：《華東理工大學》2014年碩士論文

【摘要】：LED照明是現代照明發展的一個主要方向,LED照明有著綠色環保這個特點的照明系統。作為未來發展的方向,LED有著壽命長,節能省電,應用方便簡單,設計容易,使用成本低廉等特點。目前正在取代白熾燈,以后會逐步取代熒光燈,節能燈,成為世界上第四代照明工具。隨著目前的網絡發展和人們對家居智能化的要求提升,照明也要能融入照明智能控制系統。用戶可以通過數字可尋址照明接口dali來控制LED燈的開關以及亮暗。 LED驅動器是用反激式拓?fù)浣Y(jié)構來設計,運用次級反饋來控制電流精度�，F(xiàn)在要加入智能控制系統,LED驅動器也必須能接受網絡智能控制軟件,所以在驅動器中加入了DALI控制來調光,同時還能檢測驅動器的工作狀態并且及時反饋給智能控制系統。本文重點在于設計DALI調光電路進入LED驅動器,并且完成整個驅動器的設計和調試。
[Abstract]:Led lighting is a main direction of modern lighting development, LED lighting has the characteristics of green and environmental protection lighting system. As the direction of future development, LED has the characteristics of long life, energy saving, simple application, easy design and low cost. Incandescent lamps are being replaced and will gradually replace fluorescent lamps and energy-efficient lamps as the fourth generation lighting tools in the world. With the development of network and the requirement of home intelligence, lighting should be integrated into lighting intelligent control system. The user can control the switch and brightness of LED lamp by digital addressable lighting interface dali driver is designed with flyback topology and secondary feedback is used to control current accuracy. In order to join the intelligent control system, the LED driver must be able to accept the network intelligent control software, so Dali control is added to the driver to adjust the light, at the same time, it can detect the working condition of the driver and give feedback to the intelligent control system in time. The emphasis of this paper is to design the Dali dimming circuit into the LED driver and complete the design and debugging of the whole driver.
【學位授予單位】：華東理工大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TM923.34

【參考文獻】

相關期刊論文 前10條

1 楊靜;莊圣賢;劉雪山;;雙輸出單級PFC變換器的高亮LED驅動研究[J];電工電能新技術;2011年04期

2 孫明坤;周雒維;羅全明;;串聯諧振恒流LED驅動電源的分析及設計[J];電力電子技術;2010年08期

3 常偉;張相軍;王懿杰;徐殿國;;基于Sepic與Flyback集成的LED驅動器設計[J];電力電子技術;2011年11期

4 沈霞;王洪誠;蔣林;許瑾;方瑋;;基于反激變換器的高功率因數LED驅動電源設計[J];電力自動化設備;2011年06期

5 朱洪;;基于DALI的數字可尋址調光鎮流器[J];電子產品世界;2006年13期

6 顏重光;高工;;背光及照明用LED驅動IC技術市場分析[J];電子產品世界;2008年10期

7 謝治中;丁扣寶;何杞鑫;;滯環電流控制的大功率LED恒流驅動芯片設計[J];固體電子學研究與進展;2009年02期

8 梁國輝;謝謙;王曾;羅萍;羅佳慧;;基于LLC諧振的多路輸出LED路燈恒流驅動電路[J];微電子學;2011年05期

9 劉簾曦;楊銀堂;朱樟明;;恒流LDO型白光LED驅動芯片的設計研究[J];西安電子科技大學學報;2007年02期

10 吳志鈺;;利用恒流LED驅動器設計高效率LED照明系統[J];現代顯示;2008年08期

，

本文編號：2095027