本文選題：數字化變電站 + 電子式互感器�。� 參考：《湖南大學》2014年碩士論文

【摘要】：數字化變電站是由智能化一次設備和網絡化二次設備分層構建，能夠實現變電站內智能電氣設備間信息共享和互操作的現代化變電站。隨著構建以特高壓電網為骨干網架、各級電網協調發展的堅強智能電網的目標提出，智能化變電站的建設和發展便提上了進程。數字化變電站是智能化變電站發展的基礎，是智能電網建設的重要節點。本文結合110kV數字化變電站工程實際，研究數字化變電站設計方法。 本文首先介紹了變電站自動化技術及數字化變電站的研究現狀，討論了數字化變電站區別于傳統變電站的主要技術特征，闡述了數字化變電站的總體技術架構體系。 其次，對于數字式變電站的智能化一次設備，論述了電子式互感器及合并單元的工作原理、結構及技術性能，研究了基于智能終端的智能化一次設備的實現模式，提出了電子式互感器、合并單元及智能終端的配置原則及方法。 再次，對于數字式變電站的網絡化二次設備，，論述了變電站的網絡層次架構，并按網絡架構分層的次序，分別闡述了站控層、間隔層、過程層的結構、特征，以及功能與性能要求，并針對各層特點與要求給出了站控層、間隔層、過程層的網絡配置方案及二次設備配置原則。 最后，介紹了某110kV數字化變電站實際工程概況，給出了該數字化變電站具體實施方案，并對總體設計方案、配電裝置設計方案、組網方案、監控保護系統方案等進行了詳細的說明和分析。
[Abstract]:Digital substation is a modern substation which consists of intelligent primary equipment and networked secondary equipment. It can realize information sharing and interoperation among intelligent electrical devices in substation. With the construction of UHV power grid as the backbone of the grid, the goal of a strong smart grid with coordinated development of all levels of power grid has been put forward, and the construction and development of intelligent substation has been put forward to the process. Digital substation is the basis of intelligent substation development and an important node of smart grid construction. This paper studies the design method of digital substation based on 110 kV digital substation project. This paper first introduces the research status of substation automation technology and digital substation, discusses the main technical characteristics of digital substation which is different from traditional substation, and expounds the overall technical framework of digital substation. Secondly, for the intelligent primary equipment of digital substation, the working principle, structure and technical performance of electronic transformer and merging unit are discussed, and the realization mode of intelligent primary equipment based on intelligent terminal is studied. The configuration principle and method of electronic transformer, merging unit and intelligent terminal are put forward. Thirdly, for the network secondary equipment of digital substation, the network hierarchy structure of substation is discussed, and the structure and characteristics of station control layer, interval layer and process layer are expounded according to the order of network architecture stratification. According to the characteristics and requirements of each layer, the network configuration scheme of station control layer, interval layer, process layer and secondary equipment configuration principle are given. Finally, the paper introduces the actual engineering situation of a 110 kV digital substation, gives the concrete implementation scheme of the digital substation, and gives the overall design scheme, the distribution device design scheme and the networking scheme. The scheme of monitoring and protection system is explained and analyzed in detail.
【學位授予單位】：湖南大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TM63;TM76

【參考文獻】

相關期刊論文 前10條

1 郭瑞;;淺談變電站綜合自動化控制[J];科技創新與應用;2012年06期

2 王寬;黃巍;張國平;陳佑健;;110kV數字化變電站在福建電網的應用[J];電氣應用;2012年05期

3 馬麗英;蘇小林;;國內數字化變電站現狀[J];電力學報;2011年02期

4 孫一民;李延新;黎強;;分階段實現數字化變電站系統的工程方案[J];電力系統自動化;2007年05期

5 李九虎;鄭玉平;古世東;須雷;;電子式互感器在數字化變電站的應用[J];電力系統自動化;2007年07期

6 肖世杰;;構建中國智能電網技術思考[J];電力系統自動化;2009年09期

7 傅書

本文編號：2073044