本文選題：IEC + 61850　； 參考：《上海交通大學》2014年碩士論文

【摘要】：IEC61850代表了變電站自動化系統SAS的最新趨勢,是數字化、智能化變電站的關鍵技術。本文首先基于IEC61850標準建立變電站直流電源系統的信息模型,該模型可準確描述直流設備的特定狀態和控制方式,實現相關邏輯裝置、邏輯節點的定義并根據實際工況完成特定數據對象類的信息擴充。本文提出該數字化建模方案的目的是針對直流母線人工倒排操作過程中的不安全因素,通過引入IEC61850協議設計的IED設備,利用MMS通信服務和GOOSE/SV快速報文組播相結合的網絡傳輸方式實現對直流操作閘刀的遙控分合以及閉鎖控制。避免在原有變電站直流系統中增加電氣閉鎖回路的難度,降低工程施工量,有利于解決采用該協議前各種裝置互操作不易實現的弊端,減少重復性資金投入。本文的創新之處是確定直流操作閘刀采用“增強安全的操作前選擇控制”狀態機,并配合該狀態機的工作流程,詳細設計三種判決邏輯參與閘刀閉鎖控制的判決過程,直觀反映相關邏輯節點中數據的互鎖關聯。最后為了將理論應用到工程實際,嘗試將基于IEC 61850信息建模的閘刀閉鎖控制的虛擬模型移植到直流測控裝置中,并提出相應的軟、硬件設計方案。本文希望在直流電源系統中引入該智能化、數字化改造的方案,從而有效確保重要報文數據的正確性,提高直流系統的供電可靠性。
[Abstract]:IEC61850 represents the latest trend of SAS in substation automation system. It is the key technology of digital and intelligent substation. Firstly, based on IEC61850 standard, the information model of DC power system in substation is set up. This model can accurately describe the specific state and control mode of DC equipment, and realize the relevant logic device and logical node. In this paper, the purpose of this digital modeling scheme is to solve the unsafe factors in the process of manual reverse operation of the DC bus, by introducing the IED device designed by the IEC61850 protocol, and using the network transmission of the MMS communication service and the GOOSE/SV fast packet multicast. The method realizes the remote control and closing control of the DC operating brake knife. It avoids the difficulty of increasing the electrical locking loop in the original substation DC system and reduces the construction quantity. It is beneficial to solve the malpractice of the interoperability of various devices before the agreement and reduce the reduplication capital input. The innovation of this paper is to determine the straight line. The flow operation knife uses the "enhanced safe pre operation selection control" state machine and matches the working process of the state machine, and designs the decision process of three kinds of decision logic to participate in the lock control of the knife, and directly reflects the interlocking correlation of the data in the related logic nodes. Finally, in order to apply the theory to the engineering practice, the experiment will be based on the IEC 61. 850 the virtual model of the brake lock control of the information modeling is transplanted into the DC measurement and control device, and the corresponding software and hardware design scheme is put forward. This paper hopes to introduce the intelligent and digital transformation scheme in the DC power supply system, thus effectively ensuring the correctness of the important message data and improving the reliability of the power supply of the DC system.
【學位授予單位】：上海交通大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TM63

【參考文獻】

相關期刊論文 前1條

1 周旭峰;竇曉波;鄭建勇;吳在軍;閔濤;;基于VxWorks的數字化變電站保護監控裝置軟件設計[J];江蘇電機工程;2009年01期

，

本文編號：2061024