本文選題：熔化極惰性氣體保護焊 + 焊接電源　； 參考：《電焊機》2014年12期

【摘要】：為實現焊接電流波形和電弧電壓的精確有效控制,將DSC系統和FPGA系統用于熔化極惰性氣體保護焊焊接電源的硬件和軟件設計中,分別用于實現模糊控制電弧電壓和變參數PI控制電流波形。通過實際測試表明,采用該控制系統進行實際焊接具有焊接過渡平穩、焊接質量較高及焊縫表面光潔度好等特點,并且實現了電流波形和電弧電壓的穩定控制,從而為全數字化熔化極惰性氣體保護焊焊接電源控制系統的設計與開發提供了參考。
[Abstract]:In order to realize accurate and effective control of welding current waveform and arc voltage, DSC system and FPGA system are used in the design of hardware and software of welding power source for inert gas welding. It is used to realize fuzzy control arc voltage and variable parameter Pi control current waveform respectively. The actual test shows that the control system has the characteristics of smooth welding transition, high welding quality and good finish of weld surface, and realizes the stable control of current waveform and arc voltage. It provides a reference for the design and development of the full digital control system of the welding power source for inert gas welding.
【作者單位】： 南通職業大學;泰州技師學院;泰州市教育局;
【分類號】：TG434.5

【參考文獻】

相關期刊論文 前4條

1 楊曉峰;童彥剛;尹登科;;數字化焊接電源及其智能化設計研究[J];電焊機;2008年10期

2 石s，

本文編號：2051605