HTV硅橡膠用不同高嶺土染污后的憎水遷移特性對比
本文選題:硅橡膠 + 高嶺土 ; 參考:《高電壓技術》2014年04期
【摘要】:復合絕緣子人工污穢試驗中,惰性物質的特性對染污試品的憎水性遷移特性影響顯著,選用合適的惰性物質,對完善人工污穢試驗方法,增強試驗結果的對比性有顯著意義。為此,選用3類高嶺土作為惰性物質,對比研究了染污高溫硫化硅橡膠(HTV)的憎水性遷移過程。針對3類高嶺土染污試品憎水性遷移特性差異,通過掃描電鏡、熱重分析以及傅里葉變換紅外光譜分析,對3類高嶺土的微觀形態及官能團進行了分析。試驗結果表明:污層獲取憎水性的能力由好至差分別是分析純高嶺土、化學純高嶺土及工業原料高嶺土;高嶺土對高溫硫化硅橡膠憎水性遷移過程的影響,與其自身的微觀特性有密切聯系;目前市場上所提供的分析純高嶺土及化學純高嶺土,很有可能是高嶺土熱活化后的產物—偏高嶺土。該研究結果對于復合絕緣子人工污穢試驗惰性物質的選取有參考意義,相關結論可用于輔助分析染污硅橡膠憎水性遷移特性。
[Abstract]:In the artificial pollution test of composite insulators, the characteristics of inert substances have a significant effect on the hydrophobicity of the polluted samples. The selection of suitable inert substances is of great significance to the improvement of artificial pollution test methods and the enhancement of the contrast of the test results. Therefore, the hydrophobicity migration process of contaminated high temperature vulcanized silicone rubber (HTV) was studied by using three kinds of kaolin as inert substances. Aiming at the difference of hydrophobicity migration characteristics of three kinds of kaolinite, the microscopic morphology and functional groups of three kinds of kaolin were analyzed by scanning electron microscope, thermogravimetric analysis and Fourier transform infrared spectroscopy. The results show that the hydrophobicity of waste layer from good to bad is the analysis of pure kaolin, chemical kaolin and industrial raw material kaolin, and the effect of kaolin on hydrophobicity migration process of high temperature vulcanized silicone rubber. The analytical kaolin and chemical pure kaolin provided in the market at present are probably the product of thermal activation of kaolin-metakaolin. The results are useful for the selection of inert materials in artificial contamination test of composite insulators. The relevant conclusions can be used to analyze the hydrophobic migration characteristics of contaminated silicone rubber.
【作者單位】: 清華大學深圳研究生院;中國電力科學研究院;
【基金】:國家自然科學基金(51377093)~~
【分類號】:TM215.2
【參考文獻】
相關期刊論文 前10條
1 張福增;彭功茂;王黎明;關志成;;環境溫度對復合絕緣子直流污閃特性的影響[J];高電壓技術;2010年05期
2 劉洋;周志成;魏旭;王建國;周文俊;;不同環境因素對硅橡膠憎水性及憎水遷移性的影響[J];高電壓技術;2010年10期
3 關志成;彭功茂;王黎明;賈志東;張若兵;;復合絕緣子的應用及關鍵技術研究[J];高電壓技術;2011年03期
4 彭功茂;關志成;張福增;梅紅偉;王黎明;;復合絕緣子的直流人工污穢試驗方法[J];高電壓技術;2011年03期
5 司馬文霞;施健;袁濤;楊慶;孫才新;;特高壓復合絕緣子電場計算及基于神經網絡遺傳算法的均壓環結構優化設計[J];高電壓技術;2012年02期
6 張愛華;何明中;秦芳芳;嚴慧;;高嶺土熱分解動力學[J];硅酸鹽學報;2009年10期
7 肖代波;張鑫;;復合絕緣子三種不同染污方法的比較[J];高壓電器;2011年02期
8 徐志鈕;律方成;李Z,
本文編號:1993131
本文鏈接:http://sikaile.net/kejilunwen/dianlilw/1993131.html