本文選題：差動保護 + 雙端測距�。� 參考：《華東電力》2014年12期

【摘要】：基于輸電線路的分布式參數模型,采用兩端的電氣量進行測距計算,提出了雙端測距優化算法和改進措施。該算法詳細分析了故障時線路各點電壓與電流的關系,利用接地電阻阻性特征確定故障位置,不受線路負荷、系統阻抗和過渡電阻的影響,且具有較高精度。同時針對分段參數導線和測量回路精度帶來的誤差,提出了改進措施,完善了測距方案。
[Abstract]:Based on the distributed parameter model of the transmission line, the location calculation is carried out by using the electrical quantities at both ends, and the optimization algorithm and the improvement measures are put forward. The relationship between voltage and current is analyzed in detail, and the fault location is determined by the resistance characteristic of grounding resistance, which is independent of line load, system impedance and transition resistance, and has high accuracy. At the same time, aiming at the error caused by the precision of segmented parameter conductor and measuring loop, the improvement measures are put forward and the ranging scheme is improved.
【作者單位】： 國網泰州供電公司;長園深瑞繼保自動化有限公司;
【分類號】：TM751

【參考文獻】

相關期刊論文 前2條

1 靳希;吳世敏;吳劍敏;魯煒;吳文輝;;一種基于高壓輸電線路雙端故障測距算法的偽根判別方法[J];華東電力;2010年01期

2 李磊;李鳳霞;邵玉槐;鮑景寬;;基于故障錄波數據的雙端測距算法軟件的實現[J];華東電力;2011年02期

【共引文獻】

相關期刊論文 前1條

1 劉家軍;閆泊;姚李孝;梁振鋒;安源;;同桿平行雙回線的故障測距綜述[J];電網與清潔能源;2010年11期

相關碩士學位論文 前1條

1 陳坤q，

本文編號：1992555