本文選題：置換反應 + 集流體�。� 參考：《稀有金屬材料與工程》2014年10期

【摘要】：通過改進的置換反應,以三維網狀結構泡沫鎳為基底,制備了新型多孔Ag/Ni復合泡沫金屬材料(Ag@Ni泡沫金屬)。X射線衍射(XRD)、掃描電子顯微鏡(SEM)和X射線能譜(EDS)表明,泡沫鎳基底上生成的金屬Ag顆粒呈枝晶狀且分布均勻。將其作為集流體首次應用于鋰空氣一次電池正極,通過線性伏安掃描(LSV)、電化學阻抗(EIS)和充放電測試研究了電極的電化學性能,結果表明,這種Ag@Ni泡沫金屬作為鋰空氣一次電池的氧氣極集流體,明顯提高了還原反應的催化活性,改善了電化學反應性能,電流密度0.1 mA/cm2時,放電電壓平臺從2.66升高到2.73 V,容量也由2000 mAh/g增大到2750 mAh/g,且大電流密度下改善更為明顯。
[Abstract]:A new porous Ag/Ni foamed metal material, Ag/Ni foamed metal, was prepared by modified displacement reaction. The results of SEM and EDS showed that the porous Ag/Ni composite metal foamed metal was prepared by X-ray diffraction (XRD), scanning electron microscope (SEM) and X-ray energy dispersive spectroscopy (EDS). The Ag particles formed on the foamed nickel substrate are dendritic and uniformly distributed. The electrode was used as a collector for the first time in lithium-air primary battery. The electrochemical performance of the electrode was studied by linear voltammetry scanning, electrochemical impedance spectroscopy (EIS) and charge-discharge test. The Ag@Ni foam metal was used as the oxygen collector of the lithium air primary battery. The catalytic activity of the reduction reaction was obviously improved, and the electrochemical reaction performance was improved. When the current density was 0.1 mA/cm2, the catalytic activity of the reduction reaction was improved. The discharge voltage platform increased from 2.66 to 2.73 V and the capacity also increased from 2000 mAh/g to 2750 mg / g, and the improvement was more obvious at high current density.
【作者單位】： 四川大學;
【基金】：中物院-川大協同創新聯合基金(0082604132222)
【分類號】：TM911.41;TB383.4

【相似文獻】

相關期刊論文 前10條

1 陳文革,張強;泡沫金屬的特點、應用、制備與發展[J];粉末冶金工業;2005年02期

2 史承明;王曉明;張陵;;泡沫金屬及其在建筑工程中的應用[J];陜西理工學院學報(自然科學版);2006年02期

3 李湘洲;;新型泡沫金屬一瞥[J];金屬世界;2007年01期

4 李菊香;涂善東;;多孔泡沫金屬換熱器內部的非熱力學平衡[J];華東理工大學學報(自然科學版);2009年02期

5 李雯霞;;多孔泡沫金屬的制備和性能[J];中國鑄造裝備與技術;2009年05期

6 張銘顯;陳樂平;周全;;發泡劑在多孔泡沫金屬中的應用進展[J];鑄造技術;2010年12期

7 付全榮;張銥，

本文編號：1938557