本文選題：圓筒型永磁直線電機 + 輔助槽�。� 參考：《電機與控制學報》2014年03期

【摘要】：針對圓筒型永磁直線電機存在齒槽力的問題,先得出了氣隙磁場強度的解析公式,再依據氣隙磁場強度的解析公式采用能量法推導出了齒槽力解析公式。對齒槽力解析公式進行傅里葉分解,得到了開輔助槽對齒槽力的影響規律。研究表明,為了削弱齒槽力,當N p(齒槽力周期數)=1時,開任意輔助槽數必須選擇與之相對應的極弧系數;當N p≠1時,開輔助槽數應使得對齒槽力有影響的傅里葉分解系數變?yōu)榱�。通過樣機實驗研究,驗證了選擇合理的輔助槽數能夠削弱齒槽力。
[Abstract]:In order to solve the problem of slot force in cylindrical permanent magnet linear motor, the analytical formula of air gap magnetic field intensity is obtained first, and then the analytic formula of tooth slot force is derived by energy method. The influence of auxiliary groove on the force of tooth slot is obtained by Fourier decomposition of the analytic formula of tooth groove force. The results show that in order to weaken the tooth groove force, the polar arc coefficient must be selected when the number of auxiliary slots is equal to 1, and when N p 鈮，

本文編號：1926522