138kV高壓絕緣套管的研究
本文選題:絕緣套管 + GIS終端; 參考:《上海交通大學》2014年碩士論文
【摘要】:電網是實現電力發、變、送、配、用各環節的基礎載體,隨著我國電網的電壓等級不斷提高,需要用到大量的高壓及超高壓絕緣制品,研究這類產品具有很高的市場前景。138kVGIS終端上的絕緣套管是此類高壓絕緣件中的代表性產品,目前只有少數幾個發達國家具備制造這類絕緣制品的能力,我國也主要依賴進口,本課題研究擬將其作為重點研究?jī)?nèi)容。本課題的研究工作分為三個部分:首先針對終端絕緣套管的產品特點,制定了靜態混料器混料、真空狀態下壓力凝膠的生產工藝,并分析了與現有舊工藝的不同之處。第二,從絕緣介質的電氣性能、黏度變化特性這兩個方面入手分析了材料特性。第三,用不同的環氧樹脂配方體系制造了138k VGIS終端絕緣套管,對產品進行了電氣性能試驗和運行可靠性試驗,并分析了試驗結果最終,論證了以我國現有工藝裝備和生產條件,用靜態混料器混料,真空狀態下壓力凝膠的工藝方法已經可以生產質量可靠138kVGIS終端絕緣套管;明確了在選取絕緣材料時的重要判斷依據;同時課題的研究成果也將為今后開發其他更復雜的超高壓絕緣制品提供寶貴的經驗。
[Abstract]:Power grid is the basic carrier to realize the power generation, change, delivery, distribution and use. With the continuous improvement of the voltage level of the power grid in China, a large number of high voltage and ultrahigh voltage insulation products need to be used. This kind of product has a high market prospect, and the insulation casing on.138kVGIS terminal is the representative product of this kind of high voltage insulation. A few developed countries have the ability to produce this kind of insulation, our country also mainly depends on the import. This topic is to be the key research content. The research work of this topic is divided into three parts: first, the production characteristics of the terminal insulation casing, the static mixer mixture and the vacuum state pressure gel production are made. The difference between the existing technology and the existing technology is analyzed. Second, the material characteristics are analyzed from the two aspects of the electrical properties of the insulating medium and the viscosity change characteristics. Third, the 138k VGIS terminal insulation casing is made with different epoxy resin formulation systems, and the electrical performance test and operation reliability test are carried out for the products. The results of the test are finally analyzed. It is demonstrated that the technology of using static mixer and pressure gel in vacuum state can produce reliable 138kVGIS terminal insulation casing with the existing technology and equipment and production conditions, and the vacuum state pressure gel process. The important judgment basis in the selection of insulation material is clear, and the research results of the subject will also be the future. The development of other more complex ultra-high voltage insulation products provides valuable experience.
【學位授予單位】:上海交通大學
【學位級別】:碩士
【學位授予年份】:2014
【分類號】:TM216.5
【相似文獻】
相關期刊論文 前10條
1 郝放;滕振業;;絕緣套管放電原因分析與對策[J];科技視界;2012年12期
2 ;日本制成12米整體燒制瓷絕緣套管[J];電力技術;1981年07期
3 В.Н.Молостов;左寶信;;絕緣套管硫化速度的控制[J];電工技術;1986年08期
4 王書豪,李蒙帆,王洪;復合材料軸絕緣套管的性能與應用[J];電動工具;2005年02期
5 賽芳;;關于玻璃鋼電極絕緣套管的改進[J];中國石油和化工標準與質量;2013年13期
6 黃興;;原油電脫水器高壓絕緣套管擊穿原因分析[J];油田地面工程;1991年05期
7 薛義飛;;高壓絕緣套管電場計算與絕緣分析[J];大眾科技;2014年02期
8 ;環氧樹脂絕緣套管試驗小結[J];電力電容器與無功補償;1978年01期
9 王海波,趙春華,,戰軍安;絕緣套管超聲波探傷可行性研究[J];哈爾濱理工大學學報;1997年03期
10 李存惠,吳福珍;大型交流電機轉子滑環絕緣套管結構的改進研究[J];上海電機廠科技情報;1998年02期
相關重要報紙文章 前2條
1 黑龍江 古鐵鈞;變壓器絕緣套管漏油原因及解決方法[N];電子報;2014年
2 孟云燕;穩扎穩打拼市場[N];中國電子報;2003年
相關碩士學位論文 前1條
1 朱竣;138kV高壓絕緣套管的研究[D];上海交通大學;2014年
本文編號:1903954
本文鏈接:http://sikaile.net/kejilunwen/dianlilw/1903954.html