本文選題：智能家電 + 家庭網關��； 參考：《杭州電子科技大學》2014年碩士論文

【摘要】：隨著物聯網技術的成熟、智能手機的普及，以及人們生活水平的提高，智能家電行業迎來了發展的春天。智能家電控制系統是多種學科的融合，包括電子技術、通信技術、計算機技術等。本文開展了基于Android的智能家電控制系統的研發。設計了智能家電控制系統的總體框架，并對其中的家庭網關、節點功能模塊、網絡間通信進行了深入研究。 家庭網關是智能家電控制系統的數據轉換中心，主要負責管理家庭無線網絡與互聯網之間的通信。家庭網關將無線網絡采集的信息數據通過WIFI傳送到網絡服務器上供房主查看，但是緊急事件信息的通知則是通過GPRS完成。本文設計的家庭網關的控制部分采用是ARM+Android方案，外圍主要集成WIFI模塊和GPRS模塊。本文制作了家庭網關的硬件實物，移植了操作系統，并開發了外圍模塊的驅動程序及應用程序。 節點模塊是控制和信息采集的終端，分布在家庭中的各個角落。本文主要進行了電量檢測模塊、視頻監控模塊、溫度傳感器模塊及家庭網絡節點的軟硬件設計。本文對各模塊進行了PCB的制作及處理器的控制程序設計。 最后，對本文所設計的家庭網關、節點模塊的功能進行了測試，，并進行智能家電控制系統的聯調。結果表明，系統工作正常、穩定，達到設計目標。
[Abstract]:With the maturity of the Internet of things technology, the popularity of smart phones, and the improvement of people's living standards, the smart home appliance industry ushered in the spring of development. Intelligent home appliance control system is a combination of many disciplines, including electronic technology, communication technology, computer technology and so on. The research and development of intelligent home appliance control system based on Android is carried out in this paper. The general framework of intelligent home appliance control system is designed, and the home gateway, node function module and communication between networks are studied deeply. The home gateway is the data conversion center of the intelligent home appliance control system, which is mainly responsible for managing the communication between the home wireless network and the Internet. The home gateway transmits the information data collected by wireless network to the network server through WIFI for the owner to view, but the emergency information is notified through GPRS. The control part of the home gateway designed in this paper is ARM Android scheme. The peripheral is mainly integrated with WIFI module and GPRS module. In this paper, the hardware of the home gateway is made, the operating system is transplanted, and the driver and application program of the peripheral module are developed. Node module is the control and information collection terminal, distributed in every corner of the home. This paper mainly carries on the hardware and software design of the electric quantity detection module, the video monitor module, the temperature sensor module and the home network node. In this paper, the modules of the PCB and processor control program design. Finally, the function of the home gateway and node module designed in this paper is tested, and the intelligent home appliance control system is combined. The results show that the system works normally, stably and achieves the design goal.
【學位授予單位】：杭州電子科技大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TM925.0;TP273

【參考文獻】

相關期刊論文 前10條

1 路小俊,吳在軍,鄭建勇,胡敏強;基于GPRS通訊技術的新型配變遠程監控系統[J];電力系統及其自動化學報;2005年03期

2 趙國義;;嵌入式Linux內核的配置與編譯系統研究[J];電腦編程技巧與維護;2006年11期

3 周光海;鄭日榮;張長春;;基于Linux的溫度傳感器DS18B20驅動程序設計[J];單片機與嵌入式系統應用;2010年01期

4 高小平;中國智能家居的現狀及發展趨勢[J];低壓電器;2005年04期

5 周健昌;李振興;;基于S3C6410的u-boot分析與移植[J];電子設計工程;2012年17期

6 郭岱潔;張洪欣;劉振;;基于Android溫度傳感器驅動程序設計[J];濱州學院學報;2013年03期

7 張鴻愷;伍超;;智能家居及其發展研究[J];黑龍江科技信息;2008年32期

8 馮丹,歐陽瑾;FC-RAID 3000的遠程實時管理系統設計與實現[J];計算機應用;2005年03期

9 李苗;王偉東;王帆;;國內智能家居現狀和發展[J];科技傳播;2011年10期

10 梁兵;周志燕;鐘虎;夏杰;李軍鴻;;基于ARM的礦井綜采面無線傳感器網絡的網關設計[J];煤礦機械;2011年11期

本文編號：1893590