發布時間：2018-05-09 12:06

  本文選題：無線傳感器網絡 + 傳感器節點　； 參考：《南京郵電大學》2014年碩士論文

【摘要】：隨著電力工業的穩定發展,智能電網由概念轉向?qū)嶋H應用,而智能變電站是智能電網建設中的重要一環。本文研究的內容是基于無線傳感器網絡的測溫系統設計和實現,主要是為了完成高壓設備的非接觸式測溫,并對目標進行實時監測。本文從項目的需求出發,提出了系統的設計方案。首先,介紹了由本實驗室設計的傳感器節點和匯聚節點的硬件平臺,并著重分析了基于這兩個硬件平臺的軟件設計和實現。傳感器節點承擔著網絡的數據采集任務,本系統通過移植嵌入式操作系統TinyOS構建了傳感器節點的軟件平臺,而匯聚節點則采用非操作系統的軟件設計。在傳感器節點模塊和匯聚節點模塊搭建完成的基礎上,本文從網絡拓?fù)淇刂�、�?shù)據流控制和時間同步方案這三個方面討論了組網方案的設計和實現。然后,分別從通信控制協議和應用層通信協議的設計和實現過程闡述了本系統的通信流程。網絡管理平臺是無線傳感器網絡走向?qū)嶋H應用過程中的一項關鍵性技術,本文針對所設計的系統實現了基于JAVA的網絡管理平臺。這個管理平臺提供可視化的管理界面,對傳感器網絡采集的數據進行解析、處理和存儲,同時完成了對實時溫度的監測、節點查詢、網絡配置和節點號更換等功能。本文設計的基于無線傳感器網絡的測溫系統以及相關研究工作,為該系統的工業應用提供了較高的參考和借鑒價值。
[Abstract]:With the steady development of the power industry, the smart grid has changed from concept to practical application, and intelligent substation is an important part in the construction of smart grid. The content of this paper is the design and implementation of the temperature measurement system based on wireless sensor network, mainly for the purpose of non-contact temperature measurement of high-voltage equipment and real-time monitoring of the target. Based on the requirements of the project, the design scheme of the system is put forward in this paper. Firstly, the hardware platform of sensor node and convergence node designed by our laboratory is introduced, and the software design and implementation based on these two hardware platforms are emphatically analyzed. The sensor node is responsible for the data acquisition task of the network. The software platform of the sensor node is constructed by transplanting the embedded operating system TinyOS, while the convergence node is designed by the non-operating system software. Based on the completion of sensor node module and convergence node module, this paper discusses the design and implementation of networking scheme from three aspects: network topology control, data flow control and time synchronization scheme. Then, the communication flow of the system is described from the design and implementation of communication control protocol and application layer communication protocol respectively. The network management platform is a key technology in the practical application of wireless sensor network. This paper implements the network management platform based on JAVA for the designed system. This management platform provides visual management interface, parses, processes and stores the data collected by sensor network, and completes the functions of real-time temperature monitoring, node query, network configuration and node number replacement. The temperature measurement system based on wireless sensor network and related research work are designed in this paper, which provides a high reference and reference value for the industrial application of the system.
【學位授予單位】：南京郵電大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TN929.5;TP212.9;TM76

【引證文獻】

相關碩士學位論文 前4條

1 浦凱菲;基于智能傳感器網絡的挖掘機動態測深系統的設計與實現[D];南京理工大學;2017年

2 陳蕾;無線傳感器網絡時間同步的優化方案[D];南京郵電大學;2015年

3 趙凌霄;無線傳感網絡中的密鑰預分配方案[D];南京郵電大學;2015年

4 陳晨;基于CC2530的無線測溫系統的設計與實現[D];南京郵電大學;2015年

，

本文編號：1865954