本文選題：配電自動化　切入點：分布式控制　出處：《電力系統自動化》2015年11期

【摘要】：配電網中的智能終端(STU)要實現分布式控制需要知道饋線實時拓?fù)洹Ｒ蕾嚺潆娮詣踊髡窘oSTU下發饋線實時拓?fù)涞姆绞届`活性差,不利于實現自治性控制系統;為每一個STU人工配置關聯饋線全局靜態拓?fù)?通過STU獲取關聯饋線域內開關的實時狀態信息建立饋線實時拓?fù)涞姆绞脚渲霉ぷ髁看?提出了一種STU自主識別饋線拓?fù)涞姆椒?為每個STU配置局部拓?fù)湫畔?由STU通過逐級查詢的方式獲取饋線實時拓?fù)�。以廣域閉鎖分布式電流保護為例,在有源配電網靜態模擬系統上搭建了測試系統,證明了所提饋線拓?fù)渥R別方法的有效性。
[Abstract]:In order to realize distributed control, intelligent terminal (STU) in distribution network needs to know the real-time topology of feeder.It is difficult to realize autonomous control system by relying on distribution automation master station to transmit feeder real-time topology to STU, and to manually configure the global static topology of associated feeder for each STU.The configuration of the real-time topology of the feeder is heavy in the way of obtaining the real-time state information of the switch in the relative feeder domain by STU, and a method of identifying the feeder topology independently by STU is proposed, which can configure the local topology information for each STU.The real-time topology of feeder is obtained by STU by step-by-step query.Taking wide-area latch-up distributed current protection as an example, a test system is built on the static simulation system of active distribution network, which proves the effectiveness of the proposed method of feeder topology identification.
【作者單位】： 山東大學電氣工程學院;山東理工大學智能電網研究中心;山東科匯電力自動化股份有限公司;昆明理工大學電力工程學院;
【基金】：國家高技術研究發展計劃(863計劃)資助項目(2012AA050213)~~
【分類號】：TM76

【參考文獻】

相關期刊論文 前9條

1 劉健;，

本文編號：1718239