本文選題：鐵心電抗器　切入點：電磁設計　出處：《哈爾濱理工大學》2014年碩士論文

【摘要】：鐵心電抗器是電網中不可缺少的重要電力設備，起到限流、補償、濾波等作用。隨著CAD技術的不斷發展，生產企業人員開始研究如何更加方便、高效的設計鐵心電抗器，因此這些技術越來越受到廣泛關注。 本文從電磁設計、參數化設計及有限元法分析等方面進行串聯鐵心電抗器研究。論文介紹了鐵心電抗器傳統電磁設計流程，對鐵心電抗器進行了電磁設計計算，利用Visual Basic軟件編制鐵心電抗器設計軟件，得出了鐵心電抗器設計計算單。同時，論文利用VB編程語言與Solidworks軟件完成鐵心電抗器參數化建模，實現參數化裝配，并將三維模型導入有限元軟件Ansoft中進行穩態磁場分析，得到磁感應強度分布，并結合電感矩陣?yán)媚芰糠ㄓ?jì)算鐵心電抗器電感值。此外，論文利用Ansys workbench軟件，采用計算單中的銅損和鐵損作為熱源，有限元仿真分析鐵心電抗器的溫度場，得到其溫度分布，，并對比計算溫升，確定是否符合絕緣耐溫等級的溫升要求。 論文最后利用伏安法進行鐵心電抗器試驗，測試得出其電感值，并與所仿真得出的電感值對比，二者比較一致；同時利用紅外測溫儀測試其額定電流下的各部分溫度值，與仿真結果的數值差距不大。論文研究表明，采用有限元分析可以在電感計算和溫度分布上代替?zhèn)鹘y(tǒng)電磁計算，具有一定的工程應用價值。
[Abstract]:Iron core reactor is an important power equipment in power system indispensable, to limit the current, compensation, filtering and so on. With the development of CAD technology, the production of the enterprise personnel began to study how to design more convenient, efficient core reactor, so the technology has attracted more and more attention.
This paper from the electromagnetic design, parametric design and finite element analysis and other aspects of the series iron core reactor. This paper introduces the traditional electromagnetic iron core reactor design process of the electromagnetic iron core reactor design, using Visual Basic software core reactor design software, the design and calculation of the single core reactor. At the same time, the use of VB programming language and Solidworks software to complete the core reactor parametric modeling, parametric assembly, and steady-state magnetic field analysis of 3D model into the finite element software Ansoft, obtained the distribution of magnetic induction intensity, combined with the inductance matrix calculation of core reactor inductance by using energy method. In addition, the use of Ansys workbench software, the calculation of single copper in loss and iron loss as the heat source, temperature field analysis of core reactor finite element simulation, the temperature distribution, and contrast Calculate the temperature rise to determine whether it is in accordance with the temperature rise requirement of the insulated temperature class.
The last part of the paper core reactor test by voltammetry, tests showed that the inductance value, compared with the simulation and the inductance value of the two comparison; at the same time using infrared thermometer to test the temperature of each part of the rated current value, numerical simulation results and the gap is not big. The research shows that, by using the finite element analysis it can replace the traditional electromagnetic calculation in the inductance calculation and temperature distribution, it has certain engineering application value.

【學位授予單位】：哈爾濱理工大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TM47

【參考文獻】

相關期刊論文 前10條

1 王學群;變壓器優化計算程序的設計[J];變壓器;2005年01期

2 趙永志;孫業榮;喬虹鈞;吳克彥;;干式變壓器的優化設計[J];變壓器;2006年02期

3 閻秀恪;楊桂平;洛君婷;彭博;于存湛;;空心電力電抗器的磁場研究與環流計算[J];變壓器;2010年06期

4 李會濤;王秀春;劉志凱;王彥芳;;非包封干式變壓器繞組溫度場計算研究[J];變壓器;2012年05期

5 劉志剛,王建華,耿英三,王維平;干式空心電抗器設計軟件開發與應用[J];電機與控制學報;2003年02期

6 李衛國;蘆竹茂;葉高生;;基于ANSOFT的含氣隙鐵心線圈電感分析[J];電氣開關;2011年05期

7 羅敬東;;VB在SolidWorks二次開發中的參數化方法[J];廣東水利電力職業技術學院學報;2008年02期

8 劉志剛,耿英三,王建華,武安波,王維平;干式空心電抗器的優化設計[J];高電壓技術;2003年02期

9 趙亮;張建軍;梁東;;干式帶氣隙鐵心電抗器電感計算方法[J];高壓電器;2012年06期

10 夏泉,楊濟川;干式鐵芯電抗器在城市電網中的應用[J];供用電;1998年04期

本文編號：1656730