本文選題：高壓開關　切入點：校驗裝置　出處：《西安電子科技大學》2014年碩士論文　論文類型：學位論文

【摘要】：隨著科學技術的不斷發展,高壓開關動作特性測試儀不斷推陳出新,但大部分儀器無法直觀記錄開關在分合閘過程中斷口電壓電流的變化情況,給開關的狀態監測和故障檢修設置了障礙,同時儀器對應的校驗裝置也相對落后,影響了測試性能的有效性和準確性,因此研制一個穩定可靠,便于操作的高壓開關動作特性測試儀校驗裝置就迫在眉睫。本論文主要首先介紹了高壓開關動作特性錄波技術在實際生產中使用的必要性和優越性,以及如何使用示波器測量合閘電阻投入時間及阻值,其次研究了錄波技術在測試高壓開關動作過程中記錄線圈電流電壓波形所起到的監測開關運行狀態的作用。接下來進行了高壓開關動作特性測試儀校驗裝置的研制,詳細闡述了高壓開關動作特性測試儀校驗裝置的測試原理和設計方案,設計了校驗裝置的控制回路和信號回路,對各元件參數進行分析,通過定量計算設置了裝置各種操作所需時間,實現了模擬開關的不同操作過程。最后,通過實驗驗證所研制的校驗裝置測量準確、操作便捷,基本達到了預期設計目標。
[Abstract]:With the development of science and technology, the testing instrument of high voltage switch's action characteristic is constantly innovating, but most of the instruments can not record the change of voltage and current on the break of switch during the process of opening and closing. It has set up obstacles to the condition monitoring and troubleshooting of the switch, at the same time, the corresponding calibration device of the instrument is relatively backward, which affects the validity and accuracy of the test performance, so the development of a stable and reliable, It is urgent to check the high voltage switch action characteristic tester which is easy to operate. This paper mainly introduces the necessity and superiority of the high voltage switch action characteristic recording technology in practical production. And how to use oscilloscope to measure the switch resistance input time and resistance value, Secondly, the function of recording wave recording technology in recording coil current and voltage waveform in the process of testing the operation of high voltage switch is studied. The testing principle and design scheme of the calibrating device of the high voltage switch action characteristic tester are described in detail. The control circuit and signal circuit of the calibration device are designed, and the parameters of each component are analyzed. The different operation processes of the analog switch are realized through quantitative calculation. Finally, it is verified by experiments that the developed calibration device is accurate in measurement, convenient in operation, and has basically reached the expected design goal.
【學位授予單位】：西安電子科技大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TM564

【參考文獻】

相關期刊論文 前1條

1 王移風;單片機在高壓開關測試儀中的應用[J];機電工程;1998年03期

，

本文編號：1607704