電力系統有功和無功功率充裕度評估
發布時間:2018-03-07 23:17
本文選題:無功功率 切入點:充裕度 出處:《電力系統自動化》2014年01期 論文類型:期刊論文
【摘要】:無功功率與系統電壓穩定及電壓崩潰現象密切相關,其對系統穩定運行具有重要意義。然而,在傳統可靠性評估中,很少計及無功功率的影響。文中分別從有功和無功功率兩個角度對電力系統可靠性進行研究。在評估中,考慮了有功和無功功率短缺以及由于系統故障引起的電壓擾動問題,在事故后采用三級切負荷技術來確定有功和無功功率對電力系統可靠性的影響,并找出最經濟的方法來緩解網絡參數越限問題。
[Abstract]:Reactive power is closely related to the voltage stability and voltage collapse of the system, which is of great significance to the stable operation of the system. However, in the traditional reliability evaluation, In this paper, the reliability of power system is studied from two aspects of active power and reactive power. In the evaluation, the problem of the shortage of active and reactive power and the voltage disturbance caused by system fault are considered. The effect of active and reactive power on the reliability of power system is determined by using three-stage load shedding technique after the accident, and the most economical method is found to alleviate the problem of network parameter overrun.
【作者單位】: 太原理工大學電氣與動力工程學院;南洋理工大學電機與電力工程系;
【基金】:國家國際科技合作與交流專項資助項目(2010DFB63200) 山西省科技攻關項目(20120321005-02,20130321027-01) 山西省留學人員科技活動擇優資助項目~~
【分類號】:TM714.3
,
本文編號:1581406
本文鏈接:http://sikaile.net/kejilunwen/dianlilw/1581406.html
最近更新
教材專著