本文選題：交流永磁同步電機　切入點：電流控制　出處：《電工技術學報》2014年S1期 　論文類型：期刊論文

【摘要】：基于永磁同步電機(PMSM)在旋轉坐標系下的數學模型,選擇d軸電流增量和q軸電流增量構成狀態變量,推導了交流永磁同步電機的增量式狀態方程,對模型預測控制(MPC)用于永磁同步電機的電流控制進行了研究,提出了表貼式永磁同步電機(SPMSM)的模型預測電流控制算法,實現了對電流的前饋和反饋控制,可消除d軸和q軸電流的非線性耦合(運動耦合),改善電流控制的動態性能。仿真和實驗結果表明,相比PI調節器電流控制,模型預測電流控制器具有更好的去耦合效果和更快的動態響應。
[Abstract]:Based on the mathematical model of permanent magnet synchronous motor (PMSM) in rotating coordinate system, the incremental state equation of AC permanent magnet synchronous motor is derived by selecting the increment of d axis current and Q axis current increment. The current control of permanent magnet synchronous motor (PMSM) using model predictive control (MPC) is studied. The model predictive current control algorithm of SPMSM is proposed. The feedforward and feedback control of current is realized. The nonlinear coupling between d axis and Q axis current can be eliminated, and the dynamic performance of current control can be improved. The model predicts that the current controller has better decoupling effect and faster dynamic response.
【作者單位】： 冶金自動化研究設計院伺服系統研究設計所;冶金自動化研究設計院;
【分類號】：TM341

【相似文獻】

相關期刊論文 前10條

1 陳保進,朱q，

本文編號：1577683