發布時間：2018-03-04 02:01

  本文選題：分離型熱　切入點：Ra　出處：《低溫與超導》2014年12期 　論文類型：期刊論文

【摘要】：以核電站乏燃料水池散熱及太陽能熱利用等為應用背景,實驗分析了R134a作為工質的分離式熱管在不同熱源溫度和不同充液率條件下的換熱特性。在熱源溫度從40℃以5℃間隔遞增到65℃的條件下,共進行了6組不同的充液率實驗,分別為43.7%,51.7%,60.1%,68.5%,75.2%,82.9%。實驗結果表明,系統充液率達到68.5%以后,換熱量和換熱系數隨著充液率的增加波動小,存在最佳充液率區間,并且管內蒸發溫度和換熱量隨著熱源溫度的升高而升高。與氨工質關于蒸發段換熱系數和換熱量兩方面進行數據分析對比,結果表明隨著充液率的增加,兩種工質在管內換熱系數和換熱量上存在較大差異。
[Abstract]:Based on the application background of spent fuel pool heat dissipation and solar energy utilization in nuclear power plant, The heat transfer characteristics of a separate heat pipe with R134a as a working medium under different heat source temperatures and different liquid-filling rates were analyzed experimentally. Six groups of different liquid-filling experiments were carried out under the condition that the heat source temperature increased from 40 鈩，

本文編號：1563631