本文關鍵詞： 化學制水 自動控制 可編程控制器 WinCC　出處：《北京工業大學》2014年碩士論文　論文類型：學位論文

【摘要】：本文主要以河北省邢臺鋼鐵有限責任公司動力廠熱電化學制水控制系統升級改造項目為研究對象,論述了可編程序控制器(PLC)技術、PID控制技術以及人機接口技術在化學制水領域中的應用。本文主要研究工作包括:(1)介紹了化學制水系統的工藝特點和控制要求,同時論述了化學制水自動控制系統的設計,包括硬件選型、網絡配置以及監控系統組態、軟件設計等內容。(2)針對現有化學制水處理設備的特點,本文在進行化學制水系統自動化控制系統設計時,硬件選用了SIEMENS公司的S7-300系列PLC作為控制器并進一步介紹了S7-300 PLC的編程環境及編程特點。人機接口硬件設備選用了臺灣研華工控機,監控軟件開發平臺為SIEMENS公司的WinCC V6.2,并采用分布式現場總線PROFIBUS-DP網絡實現CPU主站與各I/O從站之間的信息傳輸。系統控制方式為控制室集中監控與就地操作相結合,運行人員利用CRT上的監控畫面可以對整個生產系統監視和控制操作。另外在系統工藝設備附近設有就地操作箱,箱體上設有遠控/手動轉換開關,便于設備投運前的調試和運行過程中發生故障后的檢修。(3)本文針對熱電化學制水系統除鹽水恒壓外供的問題進行了深入的分析;在分析的基礎上對液位的恒定控制提出了液位分段控制的策略,并對該策略進行了編程調試和優化,滿足了用戶的要求。同時,為了保證PLC供電系統的穩定性,對控制系統的供電方式進行了重新設計改造。(4)熱電化學制水自動化控制系統現場運行結果表明,該系統能夠滿足熱電廠鍋爐補給水處理的自動化控制要求,并且具有可靠性高、運行平穩、控制靈活等優點,達到了客戶的設計要求。
[Abstract]:This paper focuses on the upgrading project of thermoelectrochemical water control system in power plant of Hebei Xingtai Iron and Steel Co., Ltd., and discusses the programmable controller (PLC) technology. The application of PID control technology and man-machine interface technology in chemical water production field. The main research work in this paper includes the introduction of chemical water production system technology characteristics and control requirements. At the same time, the design of chemical water automatic control system is discussed, including hardware selection, network configuration, monitoring system configuration, software design, etc.) aiming at the characteristics of existing chemical water treatment equipment. In this paper, the design of automatic control system of chemical water system is carried out. The S7-300 series PLC of SIEMENS is selected as the controller of the hardware, and the S7-300 is further introduced. The programming environment and programming characteristics of PLC. The hardware equipment of man-machine interface is selected by Taiwan Yanhua Industrial Control computer. The monitoring software development platform is WinCC V6.2 of SIEMENS Company. The distributed fieldbus PROFIBUS-DP network is used to realize the information transmission between the CPU master station and each I / O slave station. The system control mode is the combination of centralized monitoring and local operation in the control room. The operator can monitor and control the operation of the whole production system by using the monitoring screen on CRT. In addition, there is a local operation box near the system process equipment, and a remote control / manual switch is arranged on the box body. This paper makes a deep analysis on the problems of desalination constant pressure and external supply of desalted water in the thermoelectrochemical water making system, which is convenient for the commissioning of the equipment before operation and the maintenance after the failure occurred during the operation. On the basis of the analysis, the paper puts forward the strategy of the level control of the constant level, and the strategy is programmed, debugged and optimized to meet the requirements of the users. In order to ensure the stability of the PLC power supply system, the power supply mode of the control system is redesigned and reformed. The system can meet the automatic control requirements of boiler recharge water treatment in thermal power plant, and has the advantages of high reliability, stable operation and flexible control.
【學位授予單位】：北京工業大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TM621.8;TP273
，

本文編號：1467599