本文關鍵詞： 感應加熱電源 串聯諧振 軟開關 定導通時間控制 大功率　出處：《電子科技大學》2014年碩士論文　論文類型：學位論文

【摘要】：感應加熱電源廣泛應用于各種熱處理場合,但傳統大功率感應加熱電源多存在效率低,功率因數低等缺點,給用戶和電網帶來較大損失。本文以基于IGBT(Insulated Gate Bipolar Transistor,絕緣柵雙極型晶體管)設計的感應加熱電源為研究對象,簡要闡述了其工作原理和最新發展趨勢,著重分析了串聯和并聯兩種諧振方式。通過對比分析得出,在大功率工作條件下,串聯諧振能更加穩定可靠的工作。也著重分析了整流調功、斬波調功、逆變調功三種不同的功率調節方式,定性的指出,采用斬波調功對負載的適應度更高,應用更廣泛。對于感應加熱電源而言,工作效率是最重要的設計指標之一。然而大功率電源往往效率低下,本文針對此缺點,創新性的采用基于COT(Constant On Time,定導通時間)調制模式的軟開關技術設計了電源的DC/DC部分。實驗表明,此方法降低了開關損耗,并且電路能夠在軟開關狀態下穩定工作,從而大大提高了電源的工作效率本文最終完成了10k W/20k H的工程樣機的試制,達到實驗預期。
[Abstract]:Induction heating power supply is widely used in various heat treatment situations, but the traditional high-power induction heating power supply has many shortcomings, such as low efficiency, low power factor and so on. This paper is based on IGBT(Insulated Gate Bipolar Transistor. The induction heating power supply designed by insulated gate bipolar transistor (IGBT) is the object of study. The working principle and the latest development trend are briefly described, and the resonant modes of series and parallel connection are emphatically analyzed. Under the condition of high power operation, series resonance can work more stably and reliably. Three different power regulation modes, rectifier, chopper and inverter, are also analyzed qualitatively. For induction heating power supply, the working efficiency is one of the most important design indicators. However, the efficiency of high-power power supply is often low. In view of this shortcoming, this paper innovatively adopts COT(Constant on Time. The DC/DC part of the power supply is designed by the soft-switching technology of fixed on-time) modulation mode. The experiment shows that the method can reduce the switching loss and the circuit can work stably in the soft-switching state. Therefore, the efficiency of the power supply is greatly improved. In this paper, the prototype of 10kW / 20kH is finished, and the experimental expectation is reached.
【學位授予單位】：電子科技大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TM924.01;TN322.8

【參考文獻】

相關期刊論文 前5條

1 吳兆麟,袁俊國,于非;高頻感應加熱裝置的負載匹配方法[J];電力電子技術;1999年04期

2 楊水濤;張帆;趙慧杰;錢照明;;對大功率IGBT驅動電路中信號傳輸?shù)奶接慬J];電力電子技術;2006年01期

3 郭均高,張愛萍,羅肖邦;美國感應熱處理的最新發展趨勢[J];國外金屬熱處理;2002年06期

4 徐先澤;肖雅靜;時千峰;;感應加熱技術的應用及發展[J];現代零部件;2010年03期

5 謝常清;鄂加強;龔金科;;中頻感應爐操作優化智能決策支持系統的研究及其應用[J];中南大學學報(自然科學版);2013年01期

，

本文編號：1443705