本文關鍵詞：基于多領域統一建模語言的火電廠回?zé)嵯到y(tǒng)建模及其應用分析　出處：《東南大學》2015年碩士論文　論文類型：學位論文

  更多相關文章： 多領域統一建模 Modelica OperModelica 回?zé)嵯到y(tǒng) 建模

【摘要】：火電廠回?zé)嵯到y(tǒng)是全廠熱力系統的核心,它的運行情況對整個發電廠的安全性和經濟性運行起著十分重大的影響。建立重用性高、拓展性強且易于和火電廠其它領域軟件系統集成的回?zé)嵯到y(tǒng)仿真軟件包,分析回?zé)嵯到y(tǒng)的靜、動態特性,為提高火電廠的運行經濟性,提供有力的軟件支持,具有重要的研究意義和應用價值。論文對回?zé)嵯到y(tǒng)建模與仿真應用的有關問題,做了理論分析和研究：1)根據回?zé)嵯到y(tǒng)的工質流程及主要設備的物理特性,將回?zé)嵯到y(tǒng)劃分為多個相對獨立的子系統,運用集總參數法建立了各子系統的數學模型；2)基于多領域統一建模語言Modelica,采用面向?qū)ο蟮姆椒?使用開源仿真平臺OpenModelica,開發了回?zé)嵯到y(tǒng)仿真軟件包；3)使用軟件包計算分析了揚二電廠600MW機組回?zé)嵯到y(tǒng)100%負荷工況下的靜態特性,驗證了軟件包的算法穩定性和參數精確度。在此基礎上提出了一種基于回?zé)嵯到y(tǒng)仿真靜態特性的耗差分析方法,和傳統耗差分析方法的計算對比表明,可望成為多參數、全變工況計算的耗差分析新方法；4)使用軟件包對揚二電廠600MW回?zé)嵯到y(tǒng)進行動態仿真,研究了無調節作用下,回?zé)嵯到y(tǒng)在T-MCR負荷工況下系統主要調節量(燃料量、汽機調門開度)發生擾動時系統主要參數的動態響應特性,其結果可應用于優化控制系統設計中。本文基于開源平臺開發的電廠回?zé)嵯到y(tǒng)仿真軟件包及其應用分析方法,具有較高的理論意義和應用價值。
[Abstract]:The regenerative system of thermal power plant is the core of the whole plant thermal system, its operation situation plays a very important role in the safety and economic operation of the whole power plant. The simulation software package of regenerative system, which is easy to integrate with other thermal power plant software system, is developed, and the static and dynamic characteristics of regenerative system are analyzed, which can provide powerful software support for improving the operation economy of thermal power plant. This paper makes a theoretical analysis and research on the application of regenerative system modeling and simulation according to the working fluid flow of the regenerative system and the physical characteristics of the main equipment. The regenerative system is divided into several relatively independent subsystems, and the mathematical models of each subsystem are established by means of lumped parameter method. 2) based on the multi-domain unified modeling language Modelica, the simulation software package of regenerative system is developed by using the object-oriented method and the open source simulation platform OpenModelica. 3) the static characteristics of regenerative system of 600MW unit in Yanger Power Plant under 100% load condition are calculated and analyzed by using software package. The algorithm stability and parameter accuracy of the software package are verified. On the basis of this, a loss difference analysis method based on the static characteristics of the regenerative system simulation is proposed, which is compared with the traditional energy loss analysis method. It is expected that it will become a new method for the analysis of loss difference in the calculation of multi-parameter and all-variable working conditions. 4) the dynamic simulation of 600MW regenerative system in Yanger Power Plant is carried out by using software package, and the main regulating quantity (fuel quantity) of regenerative system under T-MCR load condition is studied. Dynamic response characteristics of the main parameters of the system when disturbance occurs. The results can be applied to the design of optimal control system. The simulation software package and its application analysis method developed in this paper based on open source platform are of high theoretical significance and application value.
【學位授予單位】：東南大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TM621

【參考文獻】

相關期刊論文 前10條

1 康英偉;薛陽;黃偉;陸昌貴;;鍋爐單相受熱管的三層嵌套建模研究[J];熱能動力工程;2013年04期

2 趙云云;張燕平;黃樹紅;高偉;;內置式除氧器的分段仿真模型研究[J];熱力發電;2012年01期

3 劉俊;黃運保;陳立平;王啟富;;多體動力學模型的Modelica語言建模[J];中國機械工程;2010年09期

4 王書亭;吳義忠;蔣占四;;支持動態變型設計的多領域系統知識建模與推理求解[J];計算機輔助設計與圖形學學報;2010年01期

5 張彪;沈炯;李益國;;超臨界直流爐蒸汽發生器的建模與仿真分析[J];計算機仿真;2009年04期

6 吳立強;譚文;王艷紅;;基于Modelica和Dymola的除氧器建模與仿真[J];現代電力;2008年05期

7 趙建軍;丁建完;周凡利;陳立平;;Modelica語言及其多領域統一建模與仿真機理[J];系統仿真學報;2006年S2期

8 吳義忠;吳民峰;陳立平;;基于Modelica語言的復雜機械系統統一建模平臺研究[J];中國機械工程;2006年22期

9 薛倩;周克毅;徐嘯虎;胥建群;;超臨界和超超臨界鍋爐單相受熱管的動態特性[J];動力工程;2006年01期

10 丁燕,顧昌,方瓊;300MW機組凝汽器動態數學模型的建立與仿真[J];汽輪機技術;2004年05期

相關碩士學位論文 前5條

1 張曦;機械學科虛擬實驗構件多領域統一建模與組裝平臺研究[D];上海交通大學;2012年

2 李帥華;超臨界直流鍋爐系統建模與仿真[D];華北電力大學（河北）;2009年

3 郭強;基于Modelica的火電廠給煤系統建模[D];華北電力大學（北京）;2008年

4 賀劍輝;基于Modelica面向?qū)ο笳Z言的汽輪機系統建模與仿真[D];華北電力大學（北京）;2008年

5 張浩;平圩電站600MW汽輪機組建模與仿真[D];東南大學;2006年

，

本文編號：1394110