發布時間：2017-12-31 08:36

  本文關鍵詞：大型電氣設備的監理實踐與分析　出處：《華北電力大學》2015年碩士論文　論文類型：學位論文

  更多相關文章： 設備監理 安裝 控制措施 移動廠房 安全監理 風險評估軟件

【摘要】：設備監理是保障設備質量的重要環節,為有針對性的實施輸變電工程設備安裝階段的監理工作,結合1000kV特高壓交流輸變電工程監理實踐,本文對1000kV變壓器安裝、鋼管塔組立階段的監理管控措施、關鍵環節和基于移動廠房的1100kV氣體絕緣組合電器開關設備(以下簡稱GIS)安裝技術以進行了深入分析總結,通過監理實踐,提出了變壓器、GIS安裝監理控制標準、控制要點及檢查方法,并根據特高壓安裝特點,進行了風險評估和安全監理總結,開發了輸變電工程施工安全風險評估軟件。對保障工程建設質量,具有重大指導意義和經濟效益,也從根本上保證了監理效果。論文的主要工作和成果如下：1.結合1000kV特高壓變壓器的安裝要求和特點,優化了變壓器安裝流程,總結了1000kV變壓器現場安裝關鍵環節監理控制措施,通過安裝監理實踐,提出了變壓器安裝監理控制標準、控制要點及檢查方法,確保了變壓器安裝質量,為后續1000kV變壓器現場安裝提供了寶貴的經驗。2.研制了特高壓G1S現場安裝用移動廠房,研究形成了基于移動廠房的GIS安裝技術,形成了以單梁吊車為骨架的移動廠房結構設計方案,密封、環境檢測及控制方案等研究成果,移動廠房的應用使GIS現場安裝克服外界環境對安裝過程的影響,確保GIS設備安裝條件,實現工廠化安裝,顯著改善工人作業環境、降低勞動強度,通過安裝監理實踐,提出了GIS安裝監理控制標準、控制要點及檢查方法,確保了安裝質量,提升工程監理管理水平。應用于浙北-福州1000千伏特高壓交流輸變電工程,效果良好,保障了工程工期。3.結合特高壓鋼管塔組立實際特點,探索鋼管塔組立施工過程中監理管控的方法和手段,提出了鋼管塔組立階段監理管控關鍵環節和重要管控措施。4.根據特高壓設備安裝特點,提出了風險管理建議,基于安全風險評估理論,開發了輸變電施工安全風險評估軟件,實現了動態風險自動化評估計算,有利于風險管理文件的執行,能有效提高施工風險管理的精細化水平和工作成效。為安全監理工作提供了技術保障。通過安全監理實踐,總結了特高壓設備安裝工程安全監理要點。
[Abstract]:Equipment supervision is an important link to guarantee the quality of equipment. In order to carry out the supervision work of installation stage of transmission and transformation project, combined with the supervision practice of 1000kV UHV AC transmission and transformation project. This paper deals with the supervision and control measures for the installation of 1000 kV transformers and the erection of steel pipe towers. The key links and the installation technology of 1100kV gas insulated combined electrical switchgear equipment (hereinafter referred to as GISs) based on mobile workshop are analyzed and summarized in depth. Through the supervision practice, the transformer is put forward. GIS installation supervision control standard, control points and inspection methods, and according to the characteristics of UHV installation, risk assessment and safety supervision summary. The construction safety risk assessment software of power transmission and transformation project has been developed, which is of great guiding significance and economic benefit to ensure the construction quality of the project. The main work and results of this paper are as follows: 1. Combined with the installation requirements and characteristics of 1000kV UHV transformer, the installation process of the transformer is optimized. This paper summarizes the supervision and control measures of the key links in the field installation of 1000kV transformers, and through the practice of installation supervision, puts forward the supervision control standards, control points and inspection methods for the installation of transformers. It ensures the installation quality of transformer and provides valuable experience for the field installation of 1000kV transformer. 2. The mobile factory building for the field installation of UHV G1S is developed. The GIS installation technology based on mobile workshop is formed, and the structure design scheme, sealing, environment detection and control scheme of mobile powerhouse based on single beam crane are formed. The application of mobile workshop makes GIS installation overcome the influence of external environment on the installation process, ensure the installation conditions of GIS equipment, realize factory installation, significantly improve the working environment of workers, and reduce the labor intensity. Through the practice of installation supervision, this paper puts forward the control standard, control points and inspection methods of GIS installation supervision, which ensures the installation quality. To improve the management level of project supervision. Applied to the 1000 kV UHV AC power transmission and transformation project in northern Zhejiang and Fuzhou, the effect is good, which ensures the construction period. 3. Combined with the practical characteristics of UHV steel pipe tower group. This paper probes into the methods and means of supervision and control in the process of steel pipe tower erection construction, and puts forward the key links and important control measures of supervision and control in the construction stage of steel pipe tower assembly. 4. According to the installation characteristics of ultra-high pressure equipment. Put forward the risk management suggestion, based on the safety risk assessment theory, developed the transmission and transformation power construction safety risk assessment software, realized the dynamic risk automatic evaluation calculation, is advantageous to the risk management document execution. It can effectively improve the fine level and work effect of construction risk management, and provide technical guarantee for safety supervision. Through the practice of safety supervision, the key points of safety supervision for installation of UHV equipment are summarized.
【學位授予單位】：華北電力大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TM595

【共引文獻】

相關碩士學位論文 前10條

1 尹濤;知識管理在工程咨詢項目中的應用[D];中國海洋大學;2010年

2 楊艷榮;公路工程標底編制作業指導書研究[D];天津理工大學;2011年

3 畢建旭;全過程項目管理公司評價指標體系研究[D];天津大學;2012年

4 馬偉;小浪底工程咨詢有限公司企業發展總體規劃研究[D];河海大學;2007年

5 嚴敏;代建項目運作模式研究[D];天津理工大學;2007年

6 劉本義;工程咨詢行業管理體制改革研究[D];黑龍江大學;2006年

7 付建輝;zysd公司進入國際市場戰略研究[D];重慶大學;2008年

8 周顯武;湖北省工程咨詢公司發展戰略研究[D];華中科技大學;2008年

9 張文領;基于CBR的工程項目咨詢知識管理研究[D];大連理工大學;2009年

10 劉勝文;湖南工程造價咨詢行業戰略研究[D];中南大學;2010年

，

本文編號：1359017