【摘要】：為降低機電類負載共模電壓,對多電平變流器零序電壓優化控制算法進行了研究。首先,采用了一種將經典αβ坐標系中的α和β坐標值分別拉伸為原值的3和3倍的新型mn坐標系,推導了多電平空間矢量脈寬調制(SVPWM)在這種新型坐標系中的實現方法;其次,根據引入的零序電壓約束條件,推導了多電平電路輸出狀態。實驗結果表明,在mn坐標系中,所有基本矢量的坐標為整數,零序電壓優化控制算法能確保零序電壓的值在-E/3、0和E/3之間來回切換(E為單級電平),且該算法與多電平的電平數無關。
[Abstract]:In order to reduce the common mode voltage of electromechanical load, the zero sequence voltage optimal control algorithm of multilevel converter is studied. Firstly, a new type of mn coordinate system is adopted, in which the 偽 and 尾 coordinate values in the classical 偽 尾 coordinate system are stretched to 3 and 3 times the original value, respectively, and the realization method of multilevel space vector pulse width modulation (SVPWM) in this new coordinate system is deduced. Secondly, the output state of multilevel circuit is deduced according to the zero sequence voltage constraint. The experimental results show that in the mn coordinate system, the coordinates of all basic vectors are integers, and the zero sequence voltage optimization control algorithm can ensure that the zero sequence voltage is switched back and forth between -E / 3 0 and E / 3 (E is a single level). The algorithm is independent of the number of multilevel levels.
【作者單位】： 廣東工業大學自動化學院;
【基金】：國家自然科學基金(51207026;51307025) 廣東省自然科學基金(2015A030313487)~~
【分類號】：TM46

【相似文獻】

相關期刊論文 前10條

1 白路;史U，

本文編號：2402869