【摘要】：針對超聲波電源工作時負載狀態改變,換能系統產生諧振漂移的問題,提出了一種基于STM32的頻率自動跟蹤超聲波電源的設計。電源逆變電路采用帶輔助網絡的全橋結構,阻抗匹配電路選擇了一種改進型的T型匹配網絡,應用PWM移相調功技術控制電源的輸出功率,通過數字鑒相技術得到電壓電流的相位差作為電路諧振狀態的反饋信號,結合STM32主控制器進行PI控制,調節PWM波的輸出頻率使電路始終工作于諧振狀態,實現了諧振頻率的自動跟蹤。最后基于該設計方案,實際制作了一款應用于超聲波清洗儀的電源,并通過實驗驗證了該電源具有輸出功率穩定,負載適應性強,輸出頻率自動跟蹤等特點。
[Abstract]:Aiming at the problem that the load state of ultrasonic power supply changes and the resonant drift occurs in the energy transfer system, a design of frequency automatic tracking ultrasonic power supply based on STM32 is proposed. The power inverter adopts a full-bridge structure with auxiliary network, and the impedance matching circuit selects an improved T-type matching network. The output power of the power supply is controlled by PWM phase-shift power modulation technology. The phase difference of voltage and current is used as the feedback signal of the resonant state of the circuit by digital phase detection technique. The PI control is carried out by combining with the STM32 master controller, and the output frequency of the PWM wave is adjusted so that the circuit always works in the resonant state. The automatic tracking of resonant frequency is realized. Finally, based on the design scheme, a practical power supply for ultrasonic cleaning instrument is made, and it is verified by experiments that the power supply has the characteristics of stable output power, strong load adaptability and automatic tracking of output frequency.
【作者單位】： 青島科技大學自動化與電子工程學院;
【基金】：山東省高等學�？萍加媱濏�(xiàng)目(J15LN39) 山東省自然科學基金(ZR2015FL008)
【分類號】：TM46

【相似文獻】

相關期刊論文 前1條

1 周勁松;PLC應用中的幾個問題[J];煤礦自動化;2001年06期

相關碩士學位論文 前1條

1 陳yN超;多電源模塊串并聯系統優化控制策略研究[D];哈爾濱工業大學;2017年

，

本文編號：2379200