【摘要】：隨著LED發光效率的不斷提高,大功率LED光源逐漸應用到投影系統中�；谌獿ED與方棒的照明系統,具有色域高、體積小的優點。由于LED發光角度較大,導致進入方棒的一定角度內的光線有限,造成投影亮度不高的問題。本文利用光學擴展量匹配原則和非成像光學理論設計了和后續光學系統相匹配的高光效、寬色域LED投影照明系統,提高了整個投影系統的能量利用率,擴大了投影系統的色域。本文首先根據LED光源特點以及非成像光學理論,提出了LED投影顯示方棒照明光路的整體設計思路和設計方法。理論計算了紅綠藍三色LED光源的光通量;針對LED的發光特性,采用兩種不同方法設計了準直器。根據后續顯示系統特點以及反向設計方法,設計了與準直器匹配的兩種收集器。基于光學擴展量守恒原理,設計了錐形方棒均光系統。根據投影照明系統中各器件的設計參數,在光學軟件中建立了兩組LED投影方棒照明系統的仿真模型。驗證并分析了仿真結果,選取了光學性能指標較好的一組進行加工。搭建了實際LED方棒照明系統光路,并與后續的光學系統組合成投影顯示系統。測試結果表明:設計的LED投影方棒照明系統實現了對LED出射光束的高效收集和均光;色飽和度達到75%NTSC標準色域。同時,采用了設計的LED投影方棒照明系統的投影機比市面上常見的LED投影機在顯示畫面亮度上提高了16.9%,投影顯示系統的能量利用效率得到提升。設計的LED投影方棒照明系統實現了高光效、寬色域的要求。
[Abstract]:With the improvement of LED luminescence efficiency, high power LED light source is gradually applied to projection system. The illumination system based on three color LED and square bar has the advantages of high color gamut and small volume. Because of the large luminous angle of LED, the light in a certain angle of the square bar is limited, and the projection brightness is not high. Based on the principle of optical spread matching and the theory of non-imaging optics, a high light efficiency and wide color gamut LED projection illumination system is designed to match the subsequent optical system, which improves the energy utilization ratio of the whole projection system and expands the color gamut of the projection system. Firstly, according to the characteristics of LED light source and the theory of non-imaging optics, the whole design idea and method of LED projection display square bar bright light path are put forward in this paper. The luminous flux of red, green and blue LED light source is calculated theoretically, and the collimator is designed by two different methods according to the luminescence characteristics of LED. According to the characteristics of the subsequent display system and the reverse design method, two kinds of collector matching the collimator are designed. Based on the principle of conserving optical spreading quantity, a conical square bar light sharing system is designed. According to the design parameters of each device in the projective illumination system, the simulation models of two groups of LED projector bar illumination system are established in the optical software. The simulation results are verified and analyzed. The optical path of the actual LED square bar illumination system is built, and the projection display system is combined with the subsequent optical system. The test results show that the designed LED projection bar illumination system can efficiently collect and homogenize the LED beam, and the color saturation is up to the standard color gamut of 75%NTSC. At the same time, the projector using the designed LED projection bar illumination system improves the brightness of the display screen by 16.9. the energy utilization efficiency of the projection display system is improved compared with the common LED projector in the market. The design of LED projection bar lighting system realizes the requirement of high light efficiency and wide color gamut.
【學位授予單位】：合肥工業大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TM923.34

【參考文獻】

相關期刊論文 前7條

1 楊光磊;井長龍;裴治棋;張應松;宋志剛;馮奇斌;;固態體積式真三維立體顯示器[J];液晶與顯示;2015年01期

2 陳俄振;郭震寧;智佳軍;;LED擴展光源均勻照明的透鏡設計[J];華僑大學學報(自然科學版);2013年06期

3 沈華;何勇;朱日宏;;LCD投影系統光學引擎的計算機仿真分析[J];應用光學;2007年02期

4 丁毅;顧培夫;;實現均勻照明的自由曲面反射器[J];光學學報;2007年03期

5 沈默;李海峰;陳穎;劉旭;;液晶投影顯示色均勻性的快速測量及誤差分析[J];浙江大學學報(工學版);2006年06期

6 劉靈芝;李戩洪;;復合拋物面聚光器(CPC)光學分析研究[J];能源技術;2006年02期

7 鄒靜嫻,吳榮治;數字微鏡器件(DMD)[J];液晶與顯示;2003年06期

相關碩士學位論文 前6條

1 屈碧香;基于RGB三色LED光源照明的DLP投影系統光路設計[D];浙江大學;2013年

2 徐佳;基于LED的DLP投影顯示光學引擎研究[D];華東師范大學;2008年

3 繆瑩瑩;基于LED照明的DLP投影顯示系統研究[D];浙江大學;2007年

4 郭小瑛;微顯投影顯示系統圖像質量分析與測量方法研究[D];浙江大學;2007年

5 趙慧芳;投影機性能指標測試系統和測試方法的研究[D];浙江大學;2006年

6 沈默;LED投影顯示照明系統研究[D];浙江大學;2006年

，

本文編號：2314010