【摘要】：針對高壓隔離開關安裝過程中觸指壓力的檢測需求,提出了一種可在分合閘過程中實時連續測力的新型觸頭。采用機械原理,推導了觸頭受力和觸指變形之間的關系。在考慮實際工況的前提下,給出了測力觸頭的結構設計。最后在所建的高壓隔離開關試驗平臺上對隔離開關分合閘運動過程中的觸頭壓力進行了測試。試驗結果表明:設計的測力觸頭可以對觸指壓力進行實時連續檢測,連桿長度的變化會使觸頭觸指嚙合位置不正,觸指單邊壓力增大;根據觸指壓力變化曲線可以判斷單相導電臂分合閘同步性和三相同期性檢測。因此,該新型測力觸頭可對高壓隔離開關的安裝提供幫助指導。
[Abstract]:In order to meet the need of detecting the contact pressure during the installation of the high voltage isolator, a new type of contact is proposed, which can measure the force in real time and continuously during the process of opening and closing. The relationship between contact force and contact deformation is deduced by using mechanical principle. The structural design of the force measuring contact is given on the premise of considering the actual working conditions. Finally, the contact pressure in the process of switch opening and closing is tested on the high voltage isolating switch test platform. The test results show that the designed force measuring contact can detect the contact pressure continuously in real time, and the change of the connecting rod length will cause the contact finger to be engaged in a wrong position and the one-sided pressure of the touch finger can be increased. According to the pressure change curve of touch finger, the synchronous and three-phase synchronism of single-phase conductive arm can be judged. Therefore, the new force-measuring contact can provide guidance for the installation of high-voltage disconnector.
【作者單位】： 國網新疆電力科學研究院;浙江大學機械工程學院浙江省先進制造技術重點研究實驗室;
【基金】：國網新疆電力公司科技項目(5230DK15001S)~~
【分類號】：TM564.1

【相似文獻】

相關期刊論文 前10條

1 李宏樓;李輝;邢軍偉;;Z型觸指裝配工藝改進[J];黑龍江科技信息;2009年30期

2 張志超;;電子式觸指壓力測試儀[J];河北電力技術;2013年04期

3 張彥敏;劉衛鋒;趙培峰;宋克興;;三聯體高壓隔離開關自力型觸指結構優化及成形模具設計[J];塑性工程學報;2013年01期

4 張e，

本文編號：2284983