【摘要】：基于模塊化組態設計的配電終端設計與開發,主要是在設計時將配電終端硬件按照不同的功能需求設計為獨立的硬件模塊,模塊可以采用導軌安裝等方式進行任意組合,模塊安裝不再受限于機箱尺寸及插槽數量,因此模塊種類及數量可以按照工程需求任意配置,模塊間通過帶沖突檢測的快速通道搶占機制進行通信且模塊實現即插即用。文中主要從硬件模塊分類及結構設計、高速總線接口及通信機制設計、模塊自適應接入設計等方面對所提出的基于模塊化組態設計的配電終端進行研究和闡述,主要包含了高速總線控制技術、基于沖突檢測的高速總線資源搶占技術、基于自適應接入的模塊即插即用技術等內容。
[Abstract]:The design and development of distribution terminal based on modular configuration design is mainly to design the distribution terminal hardware as an independent hardware module according to different functional requirements. The module installation is no longer limited by the size of the chassis and the number of slots, so the type and number of modules can be arbitrarily configured according to the engineering requirements. The modules communicate through the fast channel preemption mechanism with conflict detection, and the modules realize plug and play. In this paper, the hardware module classification and structure design, high-speed bus interface and communication mechanism design, module adaptive access design and other aspects of the proposed distribution terminal based on modular configuration design are discussed. It mainly includes high speed bus control technology, high speed bus resource preemption technology based on conflict detection, module plug and play technology based on adaptive access and so on.
【作者單位】： 南瑞集團公司(國網電力科學研究院);國電南瑞科技股份有限公司;四川省銀河化學股份有限公司;
【基金】：國家電網公司科技項目“具備配電線路自組網能力的智能配電監控終端技術研究”~~
【分類號】：TM76

【相似文獻】

相關期刊論文 前10條

1 ;日本配電自動化技術的發展與展望[J];農村電氣化;2000年06期

2 趙恂傳,秦仁偉;期望鐵路配電自動化[J];工程設計CAD與智能建筑;2000年05期

3 彭輝,孫，

本文編號：2223026