【摘要】：針對行波故障測距技術中行波檢測準確性和行波波速對測距精度的影響,提出一種新的雙端行波故障定位方法。首先,介紹了變分模態分解(Variational Mode Decomposition,VMD)和Teager能量算子(Teager Energy Operator,TEO)的特點,并將VMD與TEO相結合應用于故障行波波頭的檢測。其次,在雙端行波故障測距原理的基礎上,根據故障行波的傳播路徑,推導出一種不受行波波速和線路實際長度變化影響的行波故障測距新算法。該算法不需要檢測行波反射波的波頭,測距原理簡單。最后,通過EMTDC仿真驗證方法的正確性和準確性。大量的仿真結果表明該方法行波波頭檢測效果較好,測距準確度較高。
[Abstract]:Aiming at the influence of traveling wave detection accuracy and traveling wave velocity on location accuracy in traveling wave fault location technology, a new dual-terminal traveling wave fault location method is proposed. Firstly, the characteristics of variational mode decomposition (Variational Mode DecompositionVMD) and Teager energy operator (Teager Energy operator (TEO) are introduced, and the combination of VMD and TEO is applied to the detection of fault wave heads. Secondly, on the basis of the principle of two-terminal traveling wave fault location, a new traveling wave fault location algorithm is derived based on the propagation path of the fault traveling wave, which is independent of the variation of the traveling wave velocity and the actual length of the line. This algorithm does not need to detect the wave head of traveling wave reflection wave, and the principle of ranging is simple. Finally, the correctness and accuracy of the method are verified by EMTDC simulation. A large number of simulation results show that this method has good detection effect and high ranging accuracy.
【作者單位】： 新能源電力系統國家重點實驗室(華北電力大學);河北工程大學水電學院;
【基金】：中央高�；究蒲袠I(yè)務費專項資金資助項目(2014xs74)~~
【分類號】：TM75

【相似文獻】

相關期刊論文 前10條

1 高向陽;;行波法能用于有界域上U，

本文編號：2155268