【摘要】：GB50660-2011《大中型火力發電廠設計規范》推薦的超超臨界機組再熱蒸汽系統壓力損失系數為7%~9%,但二次再熱機組的再熱系統壓力損失系數的取值范圍值得進一步分析研究。根據設計參數選取了一系列不同直徑、壁厚的管道規格,利用AFT流體分析軟件對某百萬千瓦二次再熱機組再熱蒸汽系統的壓力損失進行了模擬計算,并依據汽輪機入口壓力對熱耗的影響,對管道投資和收益進行經濟性對比分析。對于百萬千瓦二次再熱機組而言,一級再熱系統的壓力損失系數宜為6.7%~7.0%,二級再熱系統的壓力損失系數宜為8.29%~9.13%。
[Abstract]:The pressure loss coefficient of reheat steam system recommended by GB 50660-2011 "Design Code for large and Medium-sized Thermal Power plants" is 7 / 9, but the range of pressure loss coefficient of reheat system of secondary reheat unit is worth further analysis and study. According to the design parameters, a series of pipe specifications with different diameters and wall thickness are selected, and the pressure loss of the reheat steam system of a million-kilowatt secondary reheat unit is simulated and calculated by using the AFT fluid analysis software. According to the influence of steam turbine inlet pressure on heat consumption, the economic comparison of pipeline investment and revenue is carried out. For a million kilowatt secondary reheat unit, the pressure loss coefficient of the primary reheat system should be 6.7 and 7.0, and the pressure loss coefficient of the secondary reheat system should be 8.29 and 9.13.
【作者單位】： 山東電力工程咨詢?cè)河邢薰?
【分類號】：TM621

【相似文獻】

相關期刊論文 前5條

1 楊文虎;馮偉忠;俞興超;;超超臨界機組再熱蒸汽系統壓降的優化及成效分析[J];華東電力;2010年08期

2 ;30萬t榛櫓屑湓偃日羝低吃誦械娜舾勺芙醄J];電力技術通訊;1974年S2期

3 趙峰;沈邱農;;三壓再熱蒸汽系統的熱力參數優化分析[J];發電設備;2010年05期

4 許仕圣;核電站汽輪機組K-500-65/3000中間汽水分離和再熱蒸汽系統熱力試驗結果[J];發電設備;1987年03期

5 ;[J];;年期

，

本文編號：2132872