T型三電平DSTATCOM功率器件開路故障容錯控制
發布時間:2018-06-18 04:51
本文選題:T型三電平 + 靜止同步補償器; 參考:《電網技術》2017年09期
【摘要】:T型三電平拓?fù)浣Y(jié)構的變流器以其輸出電壓畸變率低、轉換效率高以及功率器件電壓應力小等諸多優點,在配電網靜止無功補償領域得到了廣泛的應用。針對T型三電平配電網靜止同步補償器功率器件開路故障問題,在分析T型三電平配電網靜止同步補償器換流路徑的基礎上,提出了一種適用于配電網靜止同步補償器工況的容錯控制方法。根據對一相橋臂四個功率器件開路故障狀態的分析,將其分為內功率器件和外功率器件2類,然后針對不同的開路故障提出2套容錯控制方案。最后,仿真和實驗結果表明所提控制策略的正確性和有效性。
[Abstract]:Because of its low output voltage distortion, high conversion efficiency and low voltage stress of power devices, T-type three-level topology converter has been widely used in the field of static var compensation in distribution network. Aiming at the open circuit fault of static synchronous compensator in T type three-level distribution network, the commutation path of static synchronous compensator in T type three-level distribution network is analyzed. A fault tolerant control method for static synchronous compensator in distribution network is proposed. According to the analysis of open circuit fault state of four power devices with one phase bridge arm, it is divided into two categories: internal power device and external power device. Then, two sets of fault-tolerant control schemes are proposed for different open circuit faults. Finally, the simulation and experimental results show that the proposed control strategy is correct and effective.
【作者單位】: 中國礦業大學電氣與動力工程學院;國網張家港市供電公司;
【基金】:國家自然科學基金青年基金(51407183)~~
【分類號】:TM46;TM761.12
【相似文獻】
相關期刊論文 前10條
1 張君昌,侯義斌,李言俊;基于知識熵漲落的系統智能容錯控制法[J];彈箭與制導學報;2000年02期
2 黃孝彬,牛玉廣,孫萬云;容錯控制及其在火電廠中的應用[J];電力情報;2000年04期
3 王峰;汪t,
本文編號:2034172
本文鏈接:http://sikaile.net/kejilunwen/dianlidianqilunwen/2034172.html
最近更新
教材專著