本文選題：鎳氫電池 + 貯氫合金��； 參考：《稀土》2017年05期

【摘要】：本文主要研究了-40℃超低溫鎳氫電池及低溫合金。通過對低溫合金和常規合金的成分、粒度、比表面積及P-C-T曲線分析,證明低溫合金可以提高鎳氫電池低溫性能的可行性。通過對兩種合金粉的電化學性能測試以及制作成鎳氫電池進行性能測試,鎳氫電池的比功率和大電流放電性能大幅度提高,在-40℃超低溫環境下放電率可以達到80%以上,實現了鎳氫電池的超低溫放電性能,適合在北方寒冷地區使用,為鎳氫電池打開北方寒冷地區市場提供了技術保障。
[Abstract]:In this paper, the ultra-low-temperature nickel-hydrogen battery and low-temperature alloy are studied. By analyzing the composition, particle size, specific surface area and P-C-T curve of low temperature alloy and conventional alloy, it is proved that low temperature alloy can improve the low temperature performance of Ni-MH battery. The specific power and high current discharge performance of Ni-MH battery were greatly improved through the electrochemical performance test of two kinds of alloy powder and the performance test of Ni-MH battery. The discharge rate of Ni-MH battery could reach more than 80% at -40 鈩，

本文編號：1930772