本文選題：永磁交流接觸器 + 保護裝置　； 參考：《中國電機工程學報》2016年13期

【摘要】：提出一種帶分?jǐn)啾Ｗo(hù)裝置的新型永磁交流接觸器,接觸器分為機構部分與控制電路部分。當永磁接觸器控制回路失電或者退磁線圈出現故障、接觸器無法正常分?jǐn)鄷r(shí),保護裝置此時會被觸發,迫使接觸器鐵心克服永磁體吸力進行強制分?jǐn)�。設計了一種控制電路與接觸器進行配合工作,電路分正常工作電路和保護電路兩部分。正常工作電路負責控制接觸器進行正常的分?jǐn)嗯c吸合操作,保護電路則負責檢測并觸發保護裝置進行強制分?jǐn)啾Ｗo(hù)。為提高電路可靠性,保護電路全部采用邏輯電路進行設計,無CPU控制單元。同時,為提高供電可靠性,保護電路與正常工作電路電源單獨進行設計,保護電路電源采用接觸器主觸頭380V線電壓供電。通過實驗研究了分?jǐn)嗫刂齐妷号c輔助觸頭電壓間的時延,此時延作為保護電路的設計基準。同時進行了分?jǐn)啾Ｗo(hù)特性實驗,實驗結果表明所提出的新型交流永磁接觸器在正常工作回路失電或者出現故障時,保護裝置可有效解決永磁接觸器無法分?jǐn)嗟膯栴},大幅提高永磁接觸器的工作可靠性。
[Abstract]:A new type of permanent magnet AC contactor with break protection device is proposed. The contactor is divided into two parts: the mechanism part and the control circuit part. When the control circuit of the permanent magnet contactor is out of power or the demagnetizing coil is out of order, the protection device will be triggered, forcing the contactor core to overcome the suction of the permanent magnet. A control circuit is designed to work with contactor. The circuit is divided into two parts: normal working circuit and protective circuit. The normal working circuit is responsible for controlling the contactor to perform normal breaking and sucking operation, while the protection circuit is responsible for detecting and triggering the protective device for forced break protection. In order to improve the reliability of the circuit, the protection circuit is designed by logic circuit without CPU control unit. At the same time, in order to improve the reliability of power supply, the protection circuit and the normal working circuit power supply are designed separately. The main contactor contact is used to supply the power supply with 380 V line voltage. The delay between the break control voltage and the auxiliary contact voltage is studied experimentally, and the delay is used as the design reference of the protection circuit. The experimental results show that the new AC permanent magnet contactor can effectively solve the problem that the permanent magnet contactor can not be broken when the normal working circuit is out of power or when the fault occurs. The reliability of permanent magnet contactor is greatly improved.
【作者單位】： 浙江省低壓電器智能技術重點實驗室(溫州大學);德力西集團有限公司;
【基金】：浙江省自然科學基金面上項目(LY15E050011) 浙江省“錢江人才計劃”D類計劃項目(QJD1302003) 中國博士后科學基金項目(2015M571904) 溫州大學研究生創新基金(3162014035)~~
【分類號】：TM572.2

【相似文獻】

相關期刊論文 前10條

1 岳翔;;交流接觸器的有效保護一則[J];電工技術;2000年10期

2 劉美俊;交流接觸器無聲運行的探討[J];電氣開關;2001年02期

3 黨方義,茍亞仙,李銳;200A三相交流接觸器的無火花控制[J];工業儀表與自動化裝置;2001年02期

4 房德君;交流接觸器的節能研究[J];節能;2001年08期

5 歐陽莼(艸t，

本文編號：1915886