本文選題：電能路由器 + 冗余配置　； 參考：《電網技術》2017年07期

【摘要】：電能路由器是未來能源互聯網中的關鍵設備,其可靠性關系著未來配電網的安全可靠運行。配置冗余子模塊可提升設備的可靠性,但同時會使成本增加。以目前主流電能路由器拓?fù)錇榛A(chǔ),分析對比了設備不同冗余控制方式下的可靠性;引入成本-損失目標函數對冗余配置進行優化,研究了不同情況下目標函數最小值的求解,并以此得到可靠性與經濟性最佳的冗余配置方案。最后通過對工程實例的分析計算,為子模塊選型與冗余配置給出了建議,驗證了所提方法的可行性與有效性。
[Abstract]:Power router is the key equipment in the future energy internet. Its reliability is related to the safe and reliable operation of distribution network in the future. Configuring redundant submodules increases the reliability of the device, but at the same time increases the cost. Based on the current mainstream power router topology, the reliability of different redundancy control modes is analyzed and compared, and the cost loss objective function is introduced to optimize the redundancy configuration, and the solution of the minimum value of the objective function under different conditions is studied. The optimal redundant configuration scheme of reliability and economy is obtained. Finally, through the analysis and calculation of engineering examples, some suggestions are given for the selection of submodules and redundant configuration, and the feasibility and effectiveness of the proposed method are verified.
【作者單位】： 配電變壓器節能技術北京市重點實驗室(中國電力科學研究院);強電磁工程與新技術國家重點實驗室(華中科技大學);
【分類號】：TK01;TM732

【相似文獻】

相關期刊論文 前3條

1 李雪蓮;孫堯;莫宏偉;姚成凱;;一種基于MIMU的九陀螺冗余配置[J];哈爾濱工業大學學報;2009年05期

2 趙華陽;王武;;海陽核電站攪拌站系統分析[J];電力建設;2010年04期

3 ;[J];;年期

相關會議論文 前1條

1 劉金冰;;Ovation系統多網連接與冗余配置技術的應用[A];山東省石油學會油田電力、通信及自動化技術研討會優秀工程技術論文集[C];2009年

，

本文編號：1905342