濕冷機組乏汽余熱利用的新型熱電聯產系統集成優化
發布時間:2018-04-27 05:14
本文選題:熱電聯產 + 集中供熱。 參考:《中國電機工程學報》2017年19期
【摘要】:針對濕冷機組提出一種新型的乏汽余熱利用供熱系統,通過機組高背壓、熱泵、熱網低溫回水3種成熟技術的結合,實現多熱源的熱網水梯級加熱流程的構建。針對新系統提出了機組末級安全和新型熱電聯產系統能效評價指標及方法。以2×300MW濕冷機組為例構建系統模型,分析關鍵參數對系統能效及經濟性的影響,結果表明,機組抽凝比xec越低,旁通水流量G1越大,系統供熱等效電Weq.s及單位供熱量總成本ct越低,且隨著熱網回水溫度?1的降低,系統能效及經濟性得到進一步改善,成果用于指導濕冷機組乏汽余熱利用系統設計。
[Abstract]:In this paper, a new type of heat supply system with waste heat from spent steam for wet cooling unit is put forward. Through the combination of three mature technologies: high back pressure, heat pump and low temperature backwater in heat network, the cascade heating process of hot water network with multiple heat sources can be constructed. Based on the new system, the evaluation index and method of the last stage safety of the unit and the energy efficiency of the new cogeneration system are put forward. Taking 2 脳 300MW wet cooling unit as an example, the system model is constructed, and the influence of key parameters on system energy efficiency and economy is analyzed. The results show that the lower the xec ratio, the bigger the bypass water flow rate G1 is. The lower the Weq.s and the total cost per unit of heat supply are, the more energy efficiency and economy of the system are improved with the decrease of backwater temperature of heating network. The results can be used to guide the design of waste heat utilization system of wet cooling unit.
【作者單位】: 燕山大學建筑工程與力學學院;
【基金】:河北省高等學?茖W(xué)技術研究重點項目(ZD2016109) 燕山大學博士基金項目(B811)~~
【分類號】:TK115;TM621
,
本文編號:1809336
本文鏈接:http://sikaile.net/kejilunwen/dianlidianqilunwen/1809336.html
最近更新
教材專著