【摘要】：隨著江蘇省造船業的快速發展，近幾年江蘇省年均造船完工總量占全國造船總量的大約35%，現如今已經成為我國造船的第一大省，但目前還不是我國的造船強省。由于造船生產能力對造船企業的發展起著決定性的作用，因而，江蘇省要由造船大省轉變?yōu)樵齑瑥娛。瑢ζ湓齑瑯I(yè)生產能力進行分析是十分必要的。 本文是在有關生產力理論的論述、投入產出理論、系統理論產能過剩理論的支撐下，結合近幾年江蘇造船發展情況，闡述了江蘇省造船生產能力的現狀。借助主成分和因子分析法從產出角度對江蘇省造船實際生產能力現狀進行了評價，分別選取造船產出量因子和造船產出率因子在我國主要造船地區的因子得分排序以及綜合指數得分排序，并分析了江蘇省造船生產能力的具備的優勢和所存在的不足。然后，本文又從投入產出的角度對江蘇省造船生產能力進行研究，分別從技術效率、純技術效率和規模效率分析江蘇省造船效率，通過與我國主要造船地區的橫向比較，以及縱向比較分析江蘇省近幾年的造船效率，可知江蘇省近幾年造船企業的生產情況，最終得出了江蘇省造船企業的生產能力存在過剩問題。 文章最后，，分析了江蘇省造船產能過剩的原因，并提出了相應的建議與對策，以至于使江蘇省船業在今后的發展中得到快速、健康和可持續發展，縮短由造船大省向造船強省轉變的時間。
[Abstract]:With the rapid development of the shipbuilding industry in Jiangsu Province, the annual total shipbuilding completion in Jiangsu Province accounts for about 35 percent of the total shipbuilding volume in China in recent years. Now, Jiangsu Province has become the largest shipbuilding province in China, but it is not yet a strong shipbuilding province in China. As shipbuilding production capacity plays a decisive role in the development of shipbuilding enterprises, it is necessary to analyze the shipbuilding production capacity of Jiangsu Province in order to change from a large shipbuilding province to a strong shipbuilding province. Supported by the theory of productive forces, input-output theory and system theory of excess capacity, combined with the development of shipbuilding in Jiangsu in recent years, this paper expounds the present situation of shipbuilding production capacity in Jiangsu Province. By means of principal component analysis and factor analysis, the present situation of shipbuilding production capacity in Jiangsu Province is evaluated from the point of view of output. The factors of shipbuilding output and shipbuilding productivity in the main shipbuilding areas of China are selected respectively, and the comprehensive index scores are ranked respectively. The advantages and disadvantages of shipbuilding production capacity in Jiangsu Province are analyzed. Then, from the angle of input and output, this paper studies the shipbuilding production capacity of Jiangsu Province, analyzes the shipbuilding efficiency of Jiangsu Province from the aspects of technical efficiency, pure technical efficiency and scale efficiency, and compares them with the main shipbuilding areas in China. By comparing and analyzing the shipbuilding efficiency of Jiangsu Province in recent years, we can see the production situation of the shipbuilding enterprises in Jiangsu Province in recent years. Finally, it is concluded that the production capacity of the shipbuilding enterprises in Jiangsu Province is surplus. Finally, the paper analyzes the causes of excess shipbuilding capacity in Jiangsu Province, and puts forward corresponding suggestions and countermeasures, so that the shipbuilding industry in Jiangsu Province will be developed rapidly, healthily and sustainably in the future. Shorten the transition time from big shipbuilding province to strong shipbuilding province.
【學位授予單位】：江蘇科技大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：F426.474

【參考文獻】

相關期刊論文 前4條

1 吳錦元 ,曹友生;造船企業的規模經濟及其實現模式[J];船舶工業技術經濟信息;1999年09期

2 潘景銘;唐小我;倪得兵;;供應鏈生產能力的柔性決策研究[J];管理工程學報;2007年04期

3 張欣;馬士華;;基于有限生產能力和產出緩存的訂單接受策略[J];工業工程與管理;2008年02期

4 國經文;;產業結構調整 增強我國船舶業國際競爭力[J];中國市場;2006年15期

本文編號：2174422