【摘要】：以磷鎢酸(HPW)為活性組分,采用負載和弱堿條件下原位合成的方法,對六方介孔硅(HMS)進行改性得到HPW/HMS和HPW-HMS介孔材料,利用XRD、SEM、Py-IR和N_2吸附-脫附對合成的介孔材料進行表征,考察了HPWHMS模板劑脫除方式、HPW含量對催化β-甲氧基萘的乙�；磻�(yīng)性能的影響。實驗結果表明,與HPW/HMS比較,HPW-HMS介孔材料的結構更穩定,HPW分散更均勻、且不易溶脫、酸性更強;當HPW的質量分?jǐn)?shù)為58%時,HPW-HMS催化β-甲氧基萘乙�；磻�(yīng)β-甲氧基萘的轉化率最高,達65.3%,主產物2-甲氧基-1-萘乙酮的選擇性為78.9%;兩種介孔材料均可回收再利用,且HPW-HMS循環再利用效果勝于HPW/HMS。
[Abstract]:HPW/HMS and HPW-HMS mesoporous materials were prepared by in situ synthesis of hexagonal mesoporous silicon (HMS) with phosphotungstate (HPW) as active component under loading and weak alkali conditions. HPW/HMS and HPW-HMS mesoporous materials were prepared by XRD,SEM,. The mesoporous materials were characterized by Py-IR and N 鈮，

本文編號：2478378