幾何尺寸與溫度對CFRP筋材力學性能的影響
發布時間:2019-01-17 09:13
【摘要】:為了研究高溫下碳纖維增強復合材料(CFRP)筋材的力學性能,對不同直徑的CFRP筋材進行了高溫下的三點彎曲性能和壓縮性能測試,研究了CFRP筋的破壞形態和機理,分析了直徑和溫度對CFRP筋材彎曲強度和壓縮強度的影響。結果表明,直徑對試樣彎曲強度和壓縮強度的影響不太明顯,溫度對試樣彎曲強度和壓縮強度的影響較大;CFRP筋材的強度保留率隨著溫度的升高而降低。
[Abstract]:In order to study the mechanical properties of carbon fiber reinforced composite (CFRP) tendons at high temperature, the three point bending and compression properties of CFRP tendons with different diameters were tested at high temperature, and the failure patterns and mechanism of CFRP tendons were studied. The influence of diameter and temperature on bending strength and compression strength of CFRP bars was analyzed. The results show that the influence of diameter on the bending strength and compression strength of the specimen is not obvious, and that the temperature has a great effect on the bending strength and compression strength, and the strength retention rate of CFRP bars decreases with the increase of temperature.
【作者單位】: 天津工業大學復合材料研究所先進紡織復合材料教育部重點實驗室;
【基金】:國家高技術研究發展計劃(863計劃)項目(2012AA03A201)
【分類號】:TB332
[Abstract]:In order to study the mechanical properties of carbon fiber reinforced composite (CFRP) tendons at high temperature, the three point bending and compression properties of CFRP tendons with different diameters were tested at high temperature, and the failure patterns and mechanism of CFRP tendons were studied. The influence of diameter and temperature on bending strength and compression strength of CFRP bars was analyzed. The results show that the influence of diameter on the bending strength and compression strength of the specimen is not obvious, and that the temperature has a great effect on the bending strength and compression strength, and the strength retention rate of CFRP bars decreases with the increase of temperature.
【作者單位】: 天津工業大學復合材料研究所先進紡織復合材料教育部重點實驗室;
【基金】:國家高技術研究發展計劃(863計劃)項目(2012AA03A201)
【分類號】:TB332
【參考文獻】
相關期刊論文 前9條
1 金清平;鄭祖嘉;陸偉;陳智;;GFRP筋拉伸力學性能與破壞形態試驗分析[J];中國塑料;2014年11期
2 諸葛萍;章子華;丁勇;盧彭真;;土木工程用CFRP筋彎折抗拉性能[J];復合材料學報;2014年05期
3 樊鈺;葉定友;陳汝訓;;溫度影響下炭纖維/環氧樹脂復合材料性能預示[J];固體火箭技術;2013年06期
4 張春雷;朱波;喬琨;王永偉;;高低溫老化對碳纖維復合材料芯棒力學性能的影響[J];高科技纖維與應用;2012年05期
5 黃亞新;苗大勝;程曦;陳立;趙啟林;;不同種類拉擠FRP筋材壓縮強度研究[J];工程塑料應用;2012年08期
6 王曉璐;g,
本文編號:2409868
本文鏈接:http://sikaile.net/kejilunwen/cailiaohuaxuelunwen/2409868.html
最近更新
教材專著