【摘要】：BOPP薄膜,全稱是雙向拉伸聚烯薄膜,聚烯樹脂通過擠出流延縱橫拉伸熱定型等過程制造而得表面能很,一般于30達因(dyn),當300g/m2 BOPP膜卡紙和300 g/m2卡紙粘合,常用的純水性粘合劑很難達到粘接破紙效果而目前面的表面能BOPP膜用封口膠,均含苯或苯等機溶劑,對人體健康和境較大的害所以,開發粘接效果好用于表面能BOPP膜的水性保封口膠(簡記水性膠)廣闊的場前景本論文探討了水性保封口膠原料對表面能BOPP膜粘接性能的影響,通過調節原料添比例,來改善水性膠對表面能BOPP膜的粘接效果要從以四個方面對水性膠進行改進研究(1)篩選玻璃化轉溫度Tg對表面能BOPP膜優良附著力的聚烯酸酯乳液(2)比較類型增粘樹脂乳液對表面能BOPP膜的增粘效果,選擇最合的增粘樹脂乳液(3)添能降水性膠極性,增強粘接效果的能乳液—天然膠乳(4)篩選的潤濕助劑,提升水性膠對表面能BOPP膜的潤濕能力通過研究水性膠樣品的度p H值老化穩定性等,確定水性膠體系的儲存穩定性通過水性膠拉伸強度持粘力和粘接情況的對比研究,確定水性膠對表面能BOPP膜卡紙和卡紙的粘接效果通過述對比研究,水性保封口膠的最佳配方55 wt%聚烯酸酯乳液(Tg-30°C),30 wt%松香萜烯樹脂乳液和15 wt%能乳液以及少潤濕劑面的溶劑型封口膠相比,該水性膠無毒保,儲存穩定性和粘接效果完全能達到場客戶的要求
[Abstract]:BOPP film, full name is biaxially stretched polyene film, polyene resin is produced by extrusion flow stretching heat setting process and so on, the surface energy is very high, generally 30 dyne (dyn), when 300g/m2 BOPP film paper and 300 g/m2 card paper bonding, The commonly used pure water-based binder is difficult to achieve the effect of adhesive breaking paper. At present, the surface energy of BOPP film used for sealing adhesive contains benzene or benzene and other machine solvents, which is harmful to human health and environment. The wide Field Prospect of Waterborne Sealant (Waterborne adhesive) used for Surface Energy BOPP Film in this paper, the influence of waterborne sealing adhesive raw material on the adhesion performance of surface energy BOPP film is discussed. By adjusting the proportion of raw material, In order to improve the adhesion effect of water-borne adhesive to surface energy BOPP film, we should improve the adhesion of water-borne adhesive from four aspects. (1) the glass transition temperature (Tg) is selected to improve the adhesion of surface energy BOPP film. (2) the type of tackifying tree is compared. The viscosity enhancement effect of lipid emulsion on surface energy BOPP membrane. Select the most suitable tackifying resin emulsion (3) to reduce the polarity of water soluble adhesive and enhance the bonding effect of the energy emulsion-natural latex (4) to select the wetting agent, To improve the wettability of waterborne adhesive to surface energy BOPP film the storage stability of water-borne adhesive system was determined by comparing the tensile strength and adhesion of water-borne adhesive by studying the degree pH value aging stability of water-borne adhesive. To determine the adhesive effect of waterborne adhesive on the surface energy BOPP film paper and paper card through the comparative study, The optimum formula of waterborne sealing adhesive is 55 wt% polyolenic acid ester emulsion (Tg-30 擄C) 30 wt% rosin terpene resin emulsion, 15 wt% energy emulsion and solvent type sealant with less wetting agent surface. Storage stability and bonding effect can meet the requirements of field customers
【學位授予單位】：華南理工大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TB383.2

【參考文獻】

相關期刊論文 前10條

1 涂志剛,吳增青;BOPP薄膜中的功能助劑[J];包裝工程;2002年03期

2 吳耀根,張廣強;國內外BOPP薄膜發展概述[J];國外塑料;2004年10期

3 吳文莉;增粘樹脂對丙烯酸酯壓敏膠性能的影響[J];廣西化工;2001年03期

4 鄭永軍;乳液型冷貼紙塑復膜膠的研制[J];中國膠粘劑;2005年02期

5 周曉東,林群芳;萜烯樹脂的合成[J];廣西化工;1993年02期

6 林潔;蔣山;賀民;紀敏;張耀亨;張霖;蔡天錫;;C_5石油樹脂的研究及應用[J];合成樹脂及塑料;2006年02期

7 卜志揚;范宏;譚軍;李伯耿;;乳液型膠粘劑研究進展[J];科技通報;2007年04期

8 周怡;李金鎖;;增粘樹脂的乳化及其在壓敏膠中的應用[J];江蘇化工;1990年02期

9 肖安生;糊盒機的基本原理及常用的調節方法[J];今日印刷;2000年01期

10 劉文芳,李樹材;聚烯烴用膠粘劑研究進展[J];熱固性樹脂;2000年04期

，

本文編號：2219200