本文選題：摩擦材料 + 黃金分割原則��； 參考：《化工新型材料》2017年03期

【摘要】：在酚醛樹脂基摩擦材料配方設計中,采用黃金分割原則對增強纖維的含量進行優化。通過對摩擦材料樣品進行摩擦磨損性能、力學性能和物理性能測試,結果表明,當碳纖維質量含量為16%,礦物纖維質量含量為5%時,摩擦材料樣品的綜合性能最佳,其摩擦系數值為0.40,磨損率為0.26×10~(-7)cm~3/N·m,沖擊強度為5.21J/cm~2,硬度為85HRM,密度為1.88g/cm~3。表明利用黃金分割原則設計摩擦材料的配方在大幅減少實驗次數的同時,可以顯著改善摩擦材料的性能。
[Abstract]:In the formulation design of phenolic resin based friction material, the content of reinforced fiber was optimized by golden section principle. The friction and wear properties, mechanical properties and physical properties of the friction material samples were tested. The results showed that when the carbon fiber content was 16 and the mineral fiber mass content was 5, the comprehensive properties of the friction material samples were the best. The friction coefficient is 0.40, the wear rate is 0.26 脳 10 ~ (-7) cm ~ (-7) / N ~ (m), the impact strength is 5.21 J / cm ~ (-2), the hardness is 85 HRM, the density is 1.88 g / cm ~ (-3). It is shown that the design of friction materials by golden section principle can greatly reduce the number of experiments and improve the properties of friction materials.
【作者單位】： 咸陽師范學院化學與化工學院;
【基金】：咸陽師范學院專項科研基金(15XSYK041)
【分類號】：TQ323.1;TB39

【參考文獻】

相關期刊論文 前5條

1 楊陽;劉伯威;熊翔;;一種新型陶瓷基汽車剎車片摩擦磨損性能的研究[J];粉末冶金技術;2010年05期

2 汪s，

本文編號：2116495