本文選題：相變儲熱材料 + 陶瓷基體��； 參考：《中國粉體技術》2017年03期

【摘要】：采用混合燒結法工藝,將三元氯鹽體系Na Cl-KCl-MgCl_2相變材料與氧化鎂陶瓷基體進行復配并制備定型材料,考察成型壓力、燒成溫度和鹽含量對材料成型的影響,對最佳成型條件的材料進行儲熱性能表征。結果表明:當鹽的質量分?jǐn)?shù)為50%、燒成溫度為450℃、成型壓力為8 MPa時復合材料成型效果較好,相變材料無滲出、體積變化較小且復合材料致密度較高;DSC測試結果表明,所制備的復合相變儲熱材料的相變溫度為399.8℃,相變潛熱為129.6 J/g。
[Abstract]:In this paper, Na Cl-KCl-MgCl_2 phase change material of ternary chloride system was mixed with magnesium oxide ceramic matrix by mixed sintering process. The effects of molding pressure, sintering temperature and salt content on the molding of the material were investigated. The heat storage properties of the materials with the best forming conditions were characterized. The results show that when the mass fraction of salt is 50, the sintering temperature is 450 鈩，

本文編號：1987009