ZnO基納米材料的制備及其性質研究
本文選題:AgBr-znO + ZnFe_2O_4。 參考:《安徽大學》2015年碩士論文
【摘要】:ZnO基納米材料及其復合物因具有獨特的結構、物理化學性質以及優越的性能,被廣泛的應用在光學、磁性材料、光催化、傳感器等領域。國內外科研工作者一直在探索著如何采用簡單、快速、經濟安全的方法合成出具有高效性能的納米材料。本文在國內外大量文獻資料調研的基礎上,采用化學沉積法和水熱方法成功合成了三種不同的基于ZnO的納米材料及其復合物,研究并探討了它們在污水處理、環境保護等領域的潛在應用。研究內容包括以下幾個方面:1.gBr-Zn O納米復合材料的制備及其光催化性質研究以氯化鋅為前驅物,硼氫化鈉作為還原劑并為反應體系提供堿性環境,水作為溶劑,并以十二烷基三甲基溴化銨作為表面活性劑并提供溴源,隨后,往反應體系中加入一定量的銀源前驅物,一步反應得到AgBr-ZnO納米復合物。通過調節反應溫度,優化合成產物。隨著反應溫度的升高,產物由二元Ag-ZnO轉變?yōu)槿狝g-AgBr-ZnO,再轉變?yōu)槎狝gBr-ZnO納米復合材料。隨后分別用X-射線粉末衍射儀(XRD)、掃描電子顯微鏡(SEM)以及透射電子顯微鏡(TEM)等測試手段對產物的物相和形貌進行了表征。測試結果表明,產物是一種復合材料,是由梭形ZnO基體,及其表面附著的粒徑約10納米的AgBr組成。比表面測試結果表明復合之后的產物比單一的ZnO具有更大的比表面積。同時研究了其對染料羅丹明B的光催化降解性質。催化結果顯示,在帶有365納米帶通濾光片的紫外燈照射下,100毫克樣品只需花費27分鐘即可以將50毫升8毫克每升的羅丹明B水溶液完全降解。重復催化6次后,對羅丹明B的降解效率還可以保持85%以上。2. ZnFe2O4納米顆粒的制備及其氣敏性質研究基于前期的研究工作,以梭形ZnO和三氯化鐵為前驅物,水合胼為還原劑,通過水熱方法,控制反應溫度、反應時間等條件,制備產物。同樣采用XRD、TEM和X-射線光電子能譜(XPS)等測試手段對產物的物相和形貌進行了表征。測試結果表明,所合成的產物為粒徑在10納米左右的ZnFe2O4納米顆粒。產物是一種順磁性的半導體材料,這樣有利于樣品的收集和回收利用。同時產物具有較大的比表面積。利用所合成的產物制作了氣體傳感器,并檢測了丙酮、乙醇、甲醛、異丙醇、乙酸乙酯等實驗室常見化合物的傳感性質。對比結果表明,ZnFe2O4氣體傳感器對丙酮氣體具有較高的選擇性和響應性。3. Co0.85Se-ZnO納米復合材料的制備及其催化性質研究在實驗室前期合成的Co0.85Se納米薄膜材料工作的基礎上,以硝酸鉆、亞硒酸鈉和六水合硝酸鋅作為前驅物,水合肼為還原劑,以水作為溶劑,采用水熱合成方法,通過調節反應物物質的量比,合成了目標產物。同樣采用XRD、TEM和XPS等測試手段對產物的物相和形貌進行了表征。一系列的表征測試結果表明,產物是在Co0.84Se薄膜上附著有ZnO納米顆粒的復合材料。復合之后的產物比Co0.85Se具有更大的比表面積。產物作為催化劑催化分解水合肼,具有較好的催化效率和重復利用性。
[Abstract]:ZnO based nanomaterials and their complexes have been widely used in the fields of optics, magnetic materials, photocatalysis, and sensors because of their unique structure, physical and chemical properties and excellent properties. Researchers at home and abroad have been exploring how to use simple, fast and safe methods to synthesize highly efficient nanomaterials. On the basis of a large number of domestic and foreign literature and data, three different ZnO based nanomaterials and their complexes have been successfully synthesized by chemical deposition and hydrothermal methods, and their potential applications in the fields of sewage treatment and environmental protection are studied and discussed. The internal capacity includes the following aspects: 1.gBr-Zn O Nanocomposite The preparation and photocatalytic properties of the composite materials are studied with zinc chloride as a precursor, sodium borohydride as a reductant and an alkaline environment for the reaction system. Water is used as a solvent and twelve alkyl three methyl ammonium bromide is used as a surface active agent and a bromine source is provided. Then, a certain amount of precursor of silver source is added to the reaction system. To AgBr-ZnO nanocomposites, the synthetic products were optimized by adjusting the reaction temperature. With the increase of reaction temperature, the products changed from two yuan Ag-ZnO to three yuan Ag-AgBr-ZnO and then two yuan AgBr-ZnO nanocomposites. Then, X- ray powder diffractometer (XRD), scanning electron microscope (SEM) and transmission electron microscope (TEM) were used respectively. The test results show that the product phase and morphology are characterized. The results show that the product is a composite material consisting of a shuttle ZnO matrix and a AgBr with a particle size of about 10 nanometers attached to the surface. The photocatalytic degradation of Daming B shows that 100 mg samples can completely degrade the Luo Danming B solution of 50 ml 8 mg per liter under UV light with 365 nanoscale filters. After 6 times of repeated catalysis, the degradation efficiency of Luo Danming B can remain above 85%.2. ZnFe2O4 nanometers. The preparation of the particles and their gas sensitive properties are based on the previous research work. Using the shuttle shaped ZnO and ferric trichloride as precursors and hydrated callus as reducing agents, the products were prepared by hydrothermal method, control reaction temperature, reaction time and other conditions. The phase and morphology of the products were also measured by means of XRD, TEM and X- ray photoelectron spectroscopy (XPS). The results show that the synthesized product is ZnFe2O4 nanoparticles with a particle size of about 10 nanometers. The product is a paramagnetic semiconductor material, which is beneficial to the collection and recycling of the samples. Meanwhile, the product has a larger specific surface area. The gas sensor is made by the synthesized product and the acetone, B is detected. The sensing properties of alcohol, formaldehyde, isopropanol, ethyl acetate and other common compounds in the laboratory. The comparison results show that the ZnFe2O4 gas sensor has high selectivity and responsiveness to acetone gas and the preparation of.3. Co0.85Se-ZnO nanocomposite and its catalytic properties in the work of the Co0.85Se Nanomaterials Synthesized in the early laboratory. On the basis of this, the target products were synthesized by using the nitrate drills, sodium selenite and six zinc nitrate as precursors, hydrazine hydrate as a reducing agent, water as a reducing agent and water as a solvent. The target products were synthesized by adjusting the mass ratio of the reactants. The properties and morphology of the products were also characterized by XRD, TEM and XPS. A series of characterization of the products. The test results show that the product is a composite with ZnO nanoparticles on the Co0.84Se film. The composite has a larger specific surface area than Co0.85Se. The product has better catalytic efficiency and reutilization as a catalyst for the catalytic decomposition of hydrazine.
【學位授予單位】:安徽大學
【學位級別】:碩士
【學位授予年份】:2015
【分類號】:TB383.1;O614.241
【相似文獻】
相關期刊論文 前10條
1 杜仕國,施冬梅,鄧輝;納米材料的特異效應及其應用[J];自然雜志;2000年02期
2 ;納米材料 新世紀的黃金材料[J];城市技術監督;2000年10期
3 ;什么是納米材料[J];中國粉體技術;2000年05期
4 鄒超賢;納米材料的制備及其應用[J];廣西化纖通訊;2000年01期
5 吳祖其;納米材料[J];光源與照明;2000年03期
6 ;納米材料的特性與應用方向[J];河北陶瓷;2000年04期
7 沈青;納米材料的性能[J];江蘇陶瓷;2000年01期
8 李良訓;納米材料的特性及應用[J];金山油化纖;2000年01期
9 劉冰,任蘭亭;21世紀材料發展的方向—納米材料[J];青島大學學報(自然科學版);2000年03期
10 劉憶,劉衛華,訾樹燕,王彥芳;納米材料的特殊性能及其應用[J];沈陽工業大學學報;2000年01期
相關會議論文 前10條
1 王少強;邱化玉;;納米材料在造紙領域中的應用[A];'2006(第十三屆)全國造紙化學品開發應用技術研討會論文集[C];2006年
2 宋云揚;余濤;李艷軍;;納米材料的毒理學安全性研究進展[A];2010中國環境科學學會學術年會論文集(第四卷)[C];2010年
3 ;全國第二屆納米材料和技術應用會議[A];納米材料和技術應用進展——全國第二屆納米材料和技術應用會議論文集(上卷)[C];2001年
4 鐘家湘;葛雄章;劉景春;;納米材料改造傳統產業的實踐與建議[A];納米材料和技術應用進展——全國第二屆納米材料和技術應用會議論文集(上卷)[C];2001年
5 高善民;孫樹聲;;納米材料的應用及科研開發[A];納米材料和技術應用進展——全國第二屆納米材料和技術應用會議論文集(上卷)[C];2001年
6 ;全國第二屆納米材料和技術應用會議[A];納米材料和技術應用進展——全國第二屆納米材料和技術應用會議論文集(下卷)[C];2001年
7 金一和;孫鵬;張穎花;;納米材料的潛在性危害問題[A];中國毒理學通訊[C];2001年
8 張一方;呂毓松;任德華;陳永康;;納米材料的二種制備方法及其特征[A];第四屆中國功能材料及其應用學術會議論文集[C];2001年
9 古宏晨;;納米材料產業化重大問題及共性問題[A];納米材料和技術應用進展——全國第三屆納米材料和技術應用會議論文集(上卷)[C];2003年
10 馬玉寶;任憲福;;納米科技與納米材料[A];納米材料和技術應用進展——全國第三屆納米材料和技術應用會議論文集(上卷)[C];2003年
相關重要報紙文章 前10條
1 記者 周建人;我國出臺首批納米材料國家標準[N];中國建材報;2005年
2 記者 王陽;上海形成納米材料測試服務體系[N];上?萍紙;2004年
3 ;納米材料七項標準出臺[N];世界金屬導報;2005年
4 通訊員 韋承金邋記者 馮國梧;納米材料也可污染環境[N];科技日報;2008年
5 廖聯明;納米材料 利弊皆因個頭小[N];健康報;2009年
6 盧水平;院士建議開展納米材料毒性研究[N];中國化工報;2009年
7 郭良宏 中國科學院生態環境研究中心研究員 江桂斌 中國科學院院士;納米材料的環境應用與毒性效應[N];中國社會科學報;2010年
8 記者 任雪梅 莫璇;中科院納米材料產業園落戶佛山[N];佛山日報;2011年
9 實習生 高敏;納米材料:小身材涵蓋多領域[N];科技日報;2014年
10 本報記者 李軍;納米材料加速傳統行業升級[N];中國化工報;2013年
相關博士學位論文 前10條
1 楊楊;功能化稀土納米材料的合成及其生物成像應用[D];復旦大學;2014年
2 王艷麗;基于氧化鈦和氧化錫納米材料的制備及其在能量存儲中的應用[D];復旦大學;2014年
3 吳勇權;含銪稀土納米材料的功能化及其生物成像應用研究[D];復旦大學;2014年
4 曹仕秀;二硫化鎢(WS_2)納米材料的水熱合成與光吸收性能研究[D];重慶大學;2015年
5 廖蕾;基于功能納米材料的電化學催化研究[D];復旦大學;2014年
6 胥明;一維氧化物、硫化物納米材料的制備,,功能化與應用[D];復旦大學;2014年
7 李淑煥;納米材料親疏水性的實驗測定與計算預測[D];山東大學;2015年
8 范艷斌;亞細胞水平靶向的納米材料的設計、制備與應用[D];復旦大學;2014年
9 丁泓銘;納米粒子與細胞相互作用的理論模擬研究[D];南京大學;2015年
10 駱凱;基于金和石墨烯納米材料的生物分子化學發光新方法及其應用[D];西北大學;2015年
相關碩士學位論文 前10條
1 向蕓頡;卟啉納米材料的制備及其應用研究[D];重慶大學;2010年
2 劉武;層狀納米材料/聚合物復合改性瀝青的制備與性能[D];華南理工大學;2015年
3 劉小芳;基于納米材料/聚合膜材料構建的電化學傳感器應用于生物小分子多組分的檢測[D];西南大學;2015年
4 王小萍;基于金納米材料構建的電化學傳感器及其應用[D];上海師范大學;2015年
5 郭建華;金納米材料的修飾及其納米生物界面的研究[D];河北大學;2015年
6 魏杰;普魯士藍納米粒子的光熱毒性研究[D];上海師范大學;2015年
7 張華艷;改性TiO_2納米材料的制備及其光電性能研究[D];河北大學;2015年
8 胡雪連;基于納米材料的新型熒光傳感體系的構筑[D];江南大學;2015年
9 黃樊;氧化鈷基催化材料形貌、晶面控制與催化性能研究[D];昆明理工大學;2015年
10 周佳林;新型核殼結構金納米材料用于腫瘤的近紅外光熱治療研究[D];浙江大學;2015年
本文編號:1782302
本文鏈接:http://sikaile.net/kejilunwen/cailiaohuaxuelunwen/1782302.html