本文選題：環纏繞氣瓶　切入點：內膽設計　出處：《玻璃鋼/復合材料》2016年03期 　論文類型：期刊論文

【摘要】：由于相關鋼制內膽環纏繞氣瓶設計制造標準中未明確指定內膽壁厚的設計公式,使得市面上同樣規格的環纏繞氣瓶內膽壁厚和自緊壓力等參數存在一定差異,給監管工作帶來不便。首先全面總結了環纏繞氣瓶鋼制內膽的設計方法,然后根據設計結果建立有限元分析模型,對比分析了不同標準體系設計的氣瓶內膽壁厚的差異,以及由于壁厚差異而引起的纖維應力比和自緊壓力的變化。結果表明,GB 5099相比于其他兩種標準體系內膽設計壁厚偏大,相差約4.35%~6.0%;導致相應的環纏繞氣瓶纖維應力比相差3.5%~30.8%,自緊壓力的合理范圍也存在差異。
[Abstract]:Due to the unspecified design formula of the inner tank wall thickness in the design and manufacture standard of the steel inner ring winding gas cylinder, there are some differences in the parameters of the same specification on the market, such as the inner liner wall thickness and the self-tightening pressure, etc. This paper summarizes the design method of inner tank made of annular winding gas cylinder, and then establishes the finite element analysis model according to the design result, and compares and analyzes the difference of the inner wall thickness of gas cylinder designed with different standard system. The results show that the wall thickness of GB5099 is larger than that of the other two standard systems. The difference is about 4.35 and 6.0, which results in the difference of fiber stress ratio of the corresponding annular wound cylinders between 3.5 and 30.8, and the reasonable range of self-tightening pressure is also different.
【作者單位】： 大連理工大學化工機械學院;中國特種設備檢測研究院;
【分類號】：TB33;TE972

【相似文獻】

相關期刊論文 前1條

1 劉鵬飛,郭乙木,陶偉明;單纖維VS復合物纖維應力傳遞[J];材料科學與工程學報;2003年06期

，

本文編號：1589513