本文選題：炭黑　切入點：高密度聚乙烯　出處：《高分子學報》2016年08期 　論文類型：期刊論文

【摘要】：制備了炭黑(CB)填充高密度聚乙烯(HDPE)/乙烯-醋酸乙烯酯共聚物(EVA)雙基體復合材料,研究了加料順序、混合時間對復合材料導電性能的影響.結果表明,CB主要分布在HDPE相中;采用CB首先填充EVA然后與HDPE混合,或采用EVA/HDPE共混物與CB混合的加工策略,均可獲得導電性較優的導電復合材料.然而,混合過程顯著影響CB填充雙基體復合材料的導電性.采用EVA/HDPE共混物與CB混合法加工復合材料,導電性受相形態演化影響較小.
[Abstract]:High density polyethylene (HDPE) / ethylene-vinyl acetate copolymer (EVA) double matrix composites filled with carbon black (CB) were prepared. The effects of feeding order and mixing time on the electrical conductivity of the composites were studied. The results showed that CB was mainly distributed in the HDPE phase. When CB is first filled with EVA and then mixed with HDPE, or EVA/HDPE blends are mixed with CB, conductive composites with better conductivity can be obtained. The electric conductivity of CB filled double matrix composites was significantly affected by mixing process, and the electrical conductivity was less affected by the evolution of phase morphology when EVA/HDPE blend and CB were used to process the composites.
【作者單位】： 高分子合成與功能構造教育部重點實驗室浙江大學高分子科學與工程學系;
【基金】：寧波市重大(重點)科技攻關擇優委托項目(項目號2010B10022) 國家自然科學基金重點項目(基金號51333004)資助
【分類號】：O631;TB33
，

本文編號：1560520