本文關鍵詞： 風力機葉片 結構模型 復合材料力學 結構強度 理論分析　出處：《玻璃鋼/復合材料》2017年05期 　論文類型：期刊論文

【摘要】：截面結構強度分析校核方法是風力機葉片設計優化的關鍵問題。針對現有的葉片工程力學計算方法精度不高、有限元分析方法計算開銷較大的問題,在研究風力機復合材料葉片結構設計模型的基礎上,基于復合材料力學理論,推導出計算葉片截面周向各處拉伸和剪切應變的計算公式;在葉片生命周期內的極限載荷下,對某1.5 MW葉片進行了結構強度計算和分析,通過與該葉片在當量極限載荷下的測試結果對比,驗證了所述方法的有效性。
[Abstract]:The strength analysis and checking method of cross-section structure is the key problem in the design optimization of wind turbine blade, aiming at the problem that the accuracy of the existing blade engineering mechanics calculation method is not high, and the calculation cost of finite element analysis method is high. On the basis of studying the structural design model of composite blade of wind turbine, and based on the theory of composite material mechanics, the formulas for calculating the tensile and shear strain of blade section in circumferential direction are derived. The structural strength of a 1.5 MW blade is calculated and analyzed. The effectiveness of the proposed method is verified by comparing with the test results of the blade under the equivalent limit load.
【作者單位】： 中原工學院機電學院;
【基金】：河南省高等學校重點科研項目(16A460041) 河南省高等學�，F(xiàn)代制造裝備與儀器重點學科開放實驗室開發課題(2016MEI004)
【分類號】：TB33;TK83

【相似文獻】

相關期刊論文 前4條

1 王超;李軍向;張石強;丁`，

本文編號：1520149