定向鉆孔技術在我國煤礦地層注漿改造中的應用及發展
[Abstract]:This paper first introduces two main ways of directional grouting in coal mines in China, that is, ground pre-grouting of small displacement "S" directional borehole bore, large area grouting of "L" directional borehole formation with large displacement (including ground conventional horizontal directional drilling grouting). By using the ground horizontal directional drilling grouting and the downhole horizontal directional drilling grouting of existing geological boreholes, the grouting transformation of the ground "S" directional drilling depth and the horizontal displacement of the surface "L" directional boreholes in the vertical shaft of coal mine has been realized. Secondly, it is pointed out that with the continuous extension of coal mining to the deep and the increasing of single working face, the theory, technology and equipment, effect inspection and evaluation of directional drilling grouting technology are faced with. Finally, it is pointed out that it is necessary to strengthen the research on the laboratory hydrodynamic strata grouting simulation test bench, the grouting simulation experimental research, the grouting effect detection method in the deep strata and the grouting diffusion law (especially the horizontal directional drilling grouting) in the injected strata. The detection of grouting effect finds out the main factors affecting the slurry diffusion in deep strata and reveals the regularity of slurry diffusion. It can provide reference for the formulation of grouting scheme in deep strata of coal mine, and also point out the direction for the research of directional grouting technology.
【作者單位】: 天地科技建井研究院;北京中煤礦山工程有限公司;
【基金】:國家安全生產監督管理總局安全生產重特大事故防治關鍵技術科技項目(yangqi-0012-2017AQ)
【分類號】:TD265.4;TD745
【相似文獻】
相關期刊論文 前10條
1 張慧久;;薛村煤礦限定域預仰斜定向鉆孔技術[J];能源技術與管理;2009年03期
2 劉建林;;小紀汗煤礦探放水定向鉆孔工藝及施工方法[J];煤;2014年02期
3 陳沁東;;淺談定向鉆孔在礦井安全生產中的應用[J];科技創新與應用;2014年23期
4 張海榮;;普通鉆機施工定向鉆孔在煤礦中的應用[J];科技經濟市場;2014年03期
5 李喬喬;姚寧平;張杰;;煤礦井下水平定向鉆孔軌跡設計[J];煤礦安全;2011年12期
6 馬自明;;國內長距離定向鉆孔抽采消突技術[J];礦業安全與環保;2010年S1期
7 陽慕堯,,張治平;受控定向鉆孔技術的應用與前景[J];中國井礦鹽;1995年06期
8 張治平;陽慕堯;;受控定向鉆孔在水溶開采中的應用[J];化工礦山技術;1995年05期
9 李民主;定向鉆孔在礦井建設中的應用[J];水力采煤與管道運輸;2002年04期
10 姬中奎;梁波;衛勇鋒;;礦井近水平定向鉆孔的簡易施工法[J];西部探礦工程;2009年01期
相關會議論文 前1條
1 崔紅偉;;定向鉆孔設計與鉆孔軌跡應用技術[A];第三屆全國煤礦機械安全裝備技術發展高層論壇暨新產品技術交流會論文集[C];2012年
相關重要報紙文章 前1條
1 立南;中煤科工新裝備顯威 井下定向鉆孔創紀錄[N];中國煤炭報;2011年
本文編號:2220114
本文鏈接:http://sikaile.net/kejilunwen/anquangongcheng/2220114.html