本文選題：煤礦安全監控 + 雙重冗余��； 參考：《工礦自動化》2017年02期

【摘要】：針對目前煤礦安全監控系統存在的通信實時性差、可靠性不高、易受電磁干擾等問題,提出了一種數字式煤礦安全監控系統設計方案,介紹了系統軟、硬件設計方案及關鍵技術。該系統基于CAN總線和工業以太環網的雙重冗余結構,以ARM處理器LPC2294和嵌入式操作系統μC/OS-Ⅱ為核心。測試結果表明,在10km CAN總線,32個數字分站,200臺傳感器、執行器規模下,該系統CAN總線通信成功率為99.97%,利用率為40%~60%;系統連續運行40d,數據穩定,無中斷、異常數據產生,技術指標符合AQ 6201—2006《煤礦安全監控系統通用技術要求》。
[Abstract]:Aiming at the problems of poor real-time communication, low reliability and easy electromagnetic interference in the present coal mine safety monitoring system, a design scheme of digital coal mine safety monitoring system is put forward, and the software of the system is introduced. Hardware design and key technologies. The system is based on the dual redundant architecture of CAN bus and industrial Ethernet ring network. The core of the system is ARM processor LPC2294 and embedded operating system 渭 C / OS- 鈪，

本文編號：1881772