本文選題：金屬礦山監測監控系統 + 井下監控分站��； 參考：《太原科技大學》2013年碩士論文

【摘要】：隨著礦山信息化建設的實施以及數字化礦山的不斷完善，監測監控系統在金屬礦山中得到了越來越廣泛的應用。監測監控系統作為金屬礦山的六大系統之一，對礦山的安全生產起著非常重要的作用。監控分站是監測監控系統中的關鍵設備，本文基于監控分站的現狀和金屬礦山信息化的特點，設計和開發了具有工業以太網接口的嵌入式井下監控分站。 該監控分站為礦用一般型監控分站，主要將現場各類傳感器采集的數據經通信網絡實時傳輸?shù)奖O(jiān)控主機進行處理與顯示，同時也可響應監控主機的控制指令，將控制信號傳給現場控制設備，實現對現場設備的控制。監控分站采用基于ARM結構的嵌入式技術進行設計，，硬件以STM32F107VT6微處理器為核心，另加輸入輸出電路、顯示電路、網絡網口電路、電源及復位電路等組成。在主板上集成了LCD大屏幕液晶屏接口，通過液晶屏可直觀的顯示現場傳感器的信息。工業以太網接口可以將監控分站方便地接入礦山以太環網，大大的提高了數據傳輸速率及系統的穩定性。井下監控分站具有8路輸入、6路輸出I/O接口，可以接入不同廠家的多種傳感器信號。軟件設計采用IAR Systems EWARM作為集成開發環境，C語言作為開發語言，實現了系統初始化、數據通訊、控制和顯示等功能。 該監控分站已在甘肅金昌鐵業公司東大山礦山監測監控系統中實際應用并通過驗收。應用情況表明，井下監控分站符合國家和行業的相關設計規范，運行穩定可靠，達到了預期設計目的。
[Abstract]:With the implementation of mine information construction and the continuous improvement of digital mines, monitoring and monitoring system has been more and more widely used in metal mines. As one of the six systems in metal mines, monitoring and monitoring system plays an important role in safe production of mines. The monitoring sub-station is the key equipment in the monitoring and control system. Based on the status quo of the monitoring sub-station and the characteristics of information technology in metal mines, an embedded underground monitoring sub-station with industrial Ethernet interface is designed and developed in this paper. The monitoring sub-station is a general mine monitoring sub-station, which mainly transmits the data collected by various kinds of sensors to the monitoring host through the communication network in real time for processing and display. At the same time, it can also respond to the control instructions of the monitoring host. The control signal is transmitted to the field control equipment to realize the control of the field equipment. The monitoring sub-station is designed by embedded technology based on ARM structure. The hardware is composed of STM32F107VT6 microprocessor, input and output circuit, display circuit, network interface circuit, power supply and reset circuit. The interface of LCD large screen LCD screen is integrated on the main board, and the information of field sensor can be displayed intuitively through the LCD screen. The industrial Ethernet interface can easily connect the monitoring sub-stations to the mine Ethernet ring network, which greatly improves the data transmission rate and the stability of the system. The downhole monitoring sub-station has 8 input and 6 output I / O interfaces, which can be connected to various sensor signals from different manufacturers. The software design uses IAR Systems EWARM as the integrated development environment C language as the development language, realizes the system initialization, the data communication, the control and the display and so on function. The monitoring sub-station has been applied in Dongshan Mine Monitoring and Control system of Jinchang Iron Industry Co., Ltd. The application shows that the underground monitoring sub-station accords with the relevant design standards of the country and the industry, runs stably and reliably, and achieves the expected design purpose.
【學位授予單位】：太原科技大學
【學位級別】：碩士
【學位授予年份】：2013
【分類號】：TD76;TP277

【參考文獻】

相關期刊論文 前3條

1 徐龍輝;;提高RS485總線通信速度的一種設計[J];電子產品世界;2008年09期

2 陳柱;程健;;基于AT91RM9200的以太網通信設計與實現[J];電子技術;2008年06期

3 ;德州儀器推出業界首款可簡化系統設計與布局的隔離式CAN收發器[J];電子技術應用;2009年08期

相關博士學位論文 前1條

1 徐竟天;基于ARM9嵌入式和工業以太網的礦井瓦斯監控系統研究[D];西安科技大學;2011年

相關碩士學位論文 前10條

1 李翔;煤礦井下智能監控分站的設計[D];武漢理工大學;2011年

2 應曉蕊;工業以太網的實時性研究及系統設計[D];浙江大學;2004年

3 王雷;礦井安全綜合監測系統[D];山東科技大學;2007年

4 邊興田;基于Cortex-M3的煤礦監測控制系統設計[D];北京交通大學;2009年

5 王東;煤礦安全監控系統的設計與開發[D];北京交通大學;2009年

6 陳致遠;金屬礦山生產系統的安全分析與評價[D];武漢科技大學;2009年

7 劉煒;煤與瓦斯突出監測分站設計[D];太原理工大學;2009年

8 呂世超;基于CAN-bus的煤礦遠程監控系統[D];山東大學;2010年

9 熊若訥;煤礦井下安全智能監控分站的設計[D];武漢理工大學;2012年

10 肖萬;基于光纖傳感的煤礦瓦斯監測系統設計[D];武漢理工大學;2012年

本文編號：1858368