【摘要】：齒輪傳動具有傳動效率高、傳動比恒定、功率和速度適用范圍廣等優點,在工業產品中廣泛應用。齒輪的精度直接影響到工業產品的品質。目前齒輪參數的測量主要采用三坐標測量?jī)x、CNC齒輪測量中心等接觸式測量方法。這些接觸式測量設備的使用和維修成本均較高,不便于大范圍推廣。基于機器視覺技術的非接觸測量方法,具有實時、高效以及不損害齒面等優點,且隨著攝像設備不斷改進發展,測量精度大大提高。將機器視覺技術用于齒輪的測量中,提出了一種非接觸式的標準圓柱齒輪參數檢測方法,對齒輪的幾何參數和部分單項誤差進行了測量。
[Abstract]:Gear transmission has many advantages, such as high transmission efficiency, constant transmission ratio, wide application range of power and speed, and is widely used in industrial products. The precision of gear directly affects the quality of industrial products. At present, three-coordinate measuring instrument and CNC gear measuring center are mainly used to measure gear parameters. The cost of use and maintenance of these contact measuring equipment is high, so it is not easy to popularize in a large scale. The non-contact measurement method based on machine vision technology has the advantages of real-time, high efficiency and no damage to the tooth surface, and with the development of camera equipment, the measurement accuracy is greatly improved. In this paper, the machine vision technology is applied to the measurement of gears. A non-contact method for measuring the parameters of standard cylindrical gears is proposed, and the geometric parameters and some individual errors of gears are measured.
【作者單位】： 北京航空航天大學機械工程及自動化學院;
【基金】：國家自然科學基金資助項目(51275020) 國家科技支撐計劃課題(2014BAF08B01)
【分類號】：TH132.41;TP391.41

【相似文獻】

相關期刊論文 前10條

1 崔福林;;對“切向變位法加工短齒圓柱齒輪”一文的補充和完善[J];機械制造;1991年05期

2 王e，

本文編號：2442268