【摘要】：針對變截面渦旋盤形狀復雜程度高、傳統檢具檢驗難度大、檢測精度低的特點,提出一種基于逆向工程的渦旋盤加工精度快速診斷方法。首先,建立基于Pro/E的變截面渦旋盤三維實體模型并將其作為參考模型;然后,利用ROMER六軸75系列絕對關節臂測量機測得加工渦旋盤的表面點云數據,精簡后作為數字化模型,并將上述兩個模型進行對比分析以獲取渦旋盤的加工精度信息;最后,提出了基于圖形制導的數模匹配原則以提高數字化模型與參考模型的對齊精度,采用3種方法降低數據處理誤差。結果表明,變截面渦旋盤的加工精度和形位公差符合要求,為復雜型面機械產品加工精度診斷提供了準確、快捷和直觀的方法。
[Abstract]:In view of the high complexity of the vortex disk with variable cross section, the difficulty of the traditional inspection tool and the low precision of the inspection, a rapid diagnosis method for the machining accuracy of the vortex disk based on reverse engineering is proposed. Firstly, the three-dimensional solid model of variable cross-section vortex disk based on Pro/E is established and used as the reference model. Then, the surface point cloud data of the vortex disk are measured by the ROMER six-axis 75 series absolute joint arm measuring machine, and the data are reduced as the digital model. The two models are compared and analyzed to obtain the machining accuracy information of the scroll disk. Finally, the principle of digital and analog matching based on graphic guidance is proposed to improve the alignment accuracy of digital model and reference model, and three methods are adopted to reduce the error of data processing. The results show that the machining accuracy and shape tolerance of the variable cross section vortex disk meet the requirements and provide an accurate, fast and intuitive method for the diagnosis of machining accuracy of mechanical products with complex profile.
【作者單位】： 蘭州理工大學機電工程學院;
【基金】：國家自然科學基金資助項目(51265027) 甘肅省高等學�；究蒲袠I(yè)務費資助項目(1302ZTC034)
【分類號】：TH45

【相似文獻】

相關期刊論文 前10條

1 邵兵;;渦旋泵渦旋齒的壓力和溫度場模型[J];化工機械;2011年05期

2 黃蕾;唐景春;韓坤;;溫度場對動渦旋盤應力與應變的影響[J];低溫與超導;2013年05期

3 李振芳;渦旋體加工新工藝[J];壓縮機技術;1993年02期

4 周家勝;渦旋流體機械防止自轉機構[J];壓縮機技術;1995年03期

5 強建國;劉振全;;渦旋壓縮腔變形分析與模擬[J];系統仿真學報;2009年06期

6 Sinan H.Hussain;陳進;王立存;;通用渦旋型線中心壓縮腔幾何修正方法研究[J];壓縮機技術;2009年05期

7 韓坤;唐景春;高才;;渦旋壓縮機動渦旋盤熱彈性耦合分析[J];合肥工業大學學報(自然科學版);2013年07期

8 李超;謝文君;趙Z，

本文編號：2395121